106676-2730 ZEXEL 9 400 617 459 BOSCH INJECTION-PUMP ASSEMBLY 9400617459 1066762730 me441601


106676-2730 INJECTION-PUMP ASSEMBLY
Rating:
36
Buy INJECTION-PUMP ASSEMBLY 106676-2730 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 459 9400617459
ZEXEL 106676-2730 1066762730
MITSUBISHI ME441601 me441601

Cross reference number

BOSCH 9 400 617 459 9400617459
ZEXEL 106676-2730 1066762730
MITSUBISHI ME441601 me441601


Zexel num
Bosch num
Firm num
Name
106676-2730 
9 400 617 459 
ME441601  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D24T K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9
Pump speed r/min   825 825 825
Average injection quantity mm3/st.   121 118 124
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Boost pressure kPa   50.7 50.7
Boost pressure mmHg   380 380
Injection quantity adjustment_02
Adjusting point   B
Rack position   4.5+-0.5
Pump speed r/min   425 425 425
Average injection quantity mm3/st.   8 5.4 10.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_03
Adjusting point   D
Rack position   9.2++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   135 125 145
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   650 650 650
Rack position   R1-0.8
Boost pressure kPa   22.7 21.4 24
Boost pressure mmHg   170 160 180
Boost compensator adjustment_02
Pump speed r/min   650 650 650
Rack position   R1(9)
Boost pressure kPa   37.3 30.6 44
Boost pressure mmHg   280 230 330
Timer adjustment
Pump speed r/min   0
Advance angle deg.   2.5 2 3
Timer adjustment_02
Pump speed r/min   300
Advance angle deg.   2.5 2 3
Remarks
Start
 
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   0 0 0
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106676-2730
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)The torque control spring must does not have a set force. (5)Boost compensator stroke (6)Set idle sub-spring
----------
K=8
----------

Speed control lever angle

Test data 106676-2730
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=5deg+-5deg b=15deg+-5deg

Stop lever angle

Test data 106676-2730
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery) (2)Stopper bolt setting (3)Normal
----------
aa=0r/min bb=1-0.5mm
----------
a=35deg+-5deg b=70deg+-5deg

Timing setting

Test data 106676-2730
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(6deg)




Have questions with 106676-2730?





Group cross 106676-2730 ZEXEL

Mitsubishi 

9 400 613 211 
ME441598 
INJECTION-PUMP ASSEMBLY
6D24T
9 400 617 457 
ME441599 
INJECTION-PUMP ASSEMBLY
6D24T
9 400 617 458 
ME441600 
INJECTION-PUMP ASSEMBLY
6D24T
106676-2730  
9 400 617 459 
ME441601 
INJECTION-PUMP ASSEMBLY
6D24T
9 400 617 460 
ME441602 
INJECTION-PUMP ASSEMBLY
6D24T
9 400 617 461 
ME441603 
INJECTION-PUMP ASSEMBLY
6D24T
9 400 613 177 
ME441604 
INJECTION-PUMP ASSEMBLY
6D24T
9 400 617 462 
ME441606 
INJECTION-PUMP ASSEMBLY
6D24TC
F 01G 09U 1HR 
ME441606 
INJECTION-PUMP ASSEMBLY
6D24TC
9 400 617 463 
ME441607 
INJECTION-PUMP ASSEMBLY
6D24TC
9 400 617 464 
ME441608 
INJECTION-PUMP ASSEMBLY
6D24TC
Back to top