106676-2061 ZEXEL 9 400 611 339 BOSCH INJECTION-PUMP ASSEMBLY 9400611339 1066762061 me158551


106676-2061 INJECTION-PUMP ASSEMBLY
Rating:
32
Buy INJECTION-PUMP ASSEMBLY 106676-2061 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 339 9400611339
ZEXEL 106676-2061 1066762061
MITSUBISHI ME158551 me158551

Service parts 106676-2061 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-0470
3. GOVERNOR 105407-7041
4. SUPPLY PUMP 105207-1200
5. AUTOM. ADVANCE MECHANIS 105681-2040
6. COUPLING PLATE 105663-0910
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105110-7551
11. Nozzle and Holder ME158263
12. Open Pre:MPa(Kqf/cm2) 17.7{180}/21.6{220}
13. NOZZLE-HOLDER 105041-4131
14. NOZZLE
15. NOZZLE SET 105019-0700

Include in #1:

106676-2061 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 611 339 9400611339
ZEXEL 106676-2061 1066762061
MITSUBISHI ME158551 me158551


Zexel num
Bosch num
Firm num
Name
106676-2061 
9 400 611 339 
ME158551  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D24T K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.4
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   130 127 133
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Boost pressure kPa   41.3 41.3
Boost pressure mmHg   310 310
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.3+-0.5
Pump speed r/min   365 365 365
Average injection quantity mm3/st.   12.5 9.9 15.1
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_03
Adjusting point   D
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   135 115 155
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   700 700 700
Rack position   R1-1.45
Boost pressure kPa   5.3 4 6.6
Boost pressure mmHg   40 30 50
Boost compensator adjustment_02
Pump speed r/min   700 700 700
Rack position   R1(9.4)
Boost pressure kPa   28 21.3 34.7
Boost pressure mmHg   210 160 260
Timer adjustment
Pump speed r/min   0
Advance angle deg.   2.5 2 3
Timer adjustment_02
Pump speed r/min   300
Advance angle deg.   2.5 2 3
Remarks
Start
 
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   0 0 0
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106676-2061
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)The torque control spring must does not have a set force. (5)Main spring setting (6)Set idle sub-spring (7)Boost compensator stroke
----------
K=8
----------

Speed control lever angle

Test data 106676-2061
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(26deg)+-5deg b=(7deg)+-5deg

Stop lever angle

Test data 106676-2061
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery) (2)Stopper bolt setting
----------
aa=0r/min bb=1-0.5mm
----------
a=35deg+-5deg b=70deg+-5deg

Timing setting

Test data 106676-2061
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(6deg)




Have questions with 106676-2061?





Group cross 106676-2061 ZEXEL

Mitsubishi 

9 400 617 424 
ME158509 
INJECTION-PUMP ASSEMBLY
6D24
9 400 612 759 
ME158518 
INJECTION-PUMP ASSEMBLY
6D24T
F 019 Z10 199 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 394 
ME158510 
INJECTION-PUMP ASSEMBLY
6D24T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 612 428 
ME158511 
INJECTION-PUMP ASSEMBLY
6D24T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 425 
ME158512 
INJECTION-PUMP ASSEMBLY
6D24TC
9 400 617 426 
ME152784 
INJECTION-PUMP ASSEMBLY
6D22T2
F 01G 09U 090 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

106676-2061  
9 400 611 339 
ME158551 
INJECTION-PUMP ASSEMBLY
6D24T
9 400 611 903 
 
INJECTION-PUMP ASSEMBLY
6D24T

Mitsubishi 

9 400 617 427 
ME158579 
INJECTION-PUMP ASSEMBLY
6D24T
9 400 617 428 
ME158580 
INJECTION-PUMP ASSEMBLY
6D24TC
9 400 617 429 
ME158615 
INJECTION-PUMP ASSEMBLY
6D24T
Back to top