106675-4711 ZEXEL 9 400 612 126 BOSCH INJECTION-PUMP ASSEMBLY 9400612126 1066754711


106675-4711 INJECTION-PUMP ASSEMBLY
Rating:
75
Buy INJECTION-PUMP ASSEMBLY 106675-4711 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 612 126 9400612126
ZEXEL 106675-4711 1066754711

Service parts 106675-4711 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-6360
3. GOVERNOR 105952-2650
4. SUPPLY PUMP 105217-6030
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105663-0510
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105111-4540
11. Nozzle and Holder 6152-12-3100
12. Open Pre:MPa(Kqf/cm2) 27.5{280}
13. NOZZLE-HOLDER 105041-7130
14. NOZZLE 105025-0120
15. NOZZLE SET

Include in #1:

106675-4711 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 612 126 9400612126
ZEXEL 106675-4711 1066754711


Zexel num
Bosch num
Firm num
Name
106675-4711 
106675-4712 
9 400 612 126 
   
INJECTION-PUMP ASSEMBLY
SA6D125 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8130
Bosch type code   EFEP215A
Nozzle   105780-0050
Bosch type code   DN6TD119NP1T
Nozzle holder   105780-2090
Bosch type code   EFEP215
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131425-2120
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
RED3 control unit part number   407910-3 960
RED3 rack sensor specifications mm   19
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.8 3.75 3.85
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Rack position   (11.8)
Vist V   2.08 2.08 2.08
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   323 320 326
Max. variation between cylinders %   0 -3 3
Basic   *
Injection quantity adjustment_02
Rack position   (6.6)
Vist V   2.9 2.8 3
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   16.5 15 18
Max. variation between cylinders %   0 -15 15

Test data Ex:

Speed control lever angle

Test data 106675-4711
N:Pump normal S:Stop the pump. (1)Rack position = aa (2)Rack position bb
----------
aa=20mm bb=1mm
----------
a=27deg+-5deg b=37deg+-5deg

0000000901

Test data 106675-4711
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(150deg)

Stop lever angle

Test data 106675-4711
(Rs) rack sensor specifications (C/U) control unit part number (V) Rack sensor output voltage (R) Rack position (mm) 1. Confirming governor output characteristics (rack 19 mm, span 6 mm) (1)When the output voltages of the rack sensor are V1 and V2, check that the rack positions R1 and R2 in the table above are satisfied.
----------

----------




Have questions with 106675-4711?





Group cross 106675-4711 ZEXEL

Komatsu 

 
6152721912 
INJECTION-PUMP ASSEMBLY
SA6D125
106675-4711  

106675-4712 
9 400 612 126 
 
INJECTION-PUMP ASSEMBLY
SA6D125

Komatsu 

9 400 612 504 
6152721913 
INJECTION-PUMP ASSEMBLY
SA6D125
F 01G 09U 08Z 
6152721914 
INJECTION-PUMP ASSEMBLY
SAA6D125
F 019 Z20 424 
 
INJECTION-PUMP ASSEMBLY
9 400 613 270 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 617 410 
6152721915 
INJECTION-PUMP ASSEMBLY
SAA6D125
Back to top