106675-4651 ZEXEL 9 400 613 208 BOSCH INJECTION-PUMP ASSEMBLY 9400613208 1066754651


106675-4651 INJECTION-PUMP ASSEMBLY
Rating:
62
Buy INJECTION-PUMP ASSEMBLY 106675-4651 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 613 208 9400613208
ZEXEL 106675-4651 1066754651

Service parts 106675-4651 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-6080
3. GOVERNOR 105407-7571
4. SUPPLY PUMP 105237-5470
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105663-0470
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-8530
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 15.7{160}/21.6{220}
13. NOZZLE-HOLDER 105030-4711
14. NOZZLE
15. NOZZLE SET 105019-2490

Include in #1:

106675-4651 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 613 208 9400613208
ZEXEL 106675-4651 1066754651


Zexel num
Bosch num
Firm num
Name
106675-4651 
9 400 613 208 
  DAEWOO
INJECTION-PUMP ASSEMBLY
DE12TI K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-1520
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.9 3.85 3.95
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   12.5
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   187 185 189
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Boost pressure kPa   103 103
Boost pressure mmHg   775 775
Injection quantity adjustment_02
Adjusting point   B
Rack position   6.7+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   10 8.7 11.3
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Boost compensator adjustment
Pump speed r/min   500 500 500
Rack position   R1-0.6
Boost pressure kPa   70 66 74
Boost pressure mmHg   525 495 555
Boost compensator adjustment_02
Pump speed r/min   500 500 500
Rack position   R1(12.5)
Boost pressure kPa   90 83.3 96.7
Boost pressure mmHg   675 625 725

Test data Ex:

Governor adjustment

Test data 106675-4651
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)The torque control spring does not operate. (4)Boost compensator stroke (5)Set idle sub-spring (6)Main spring setting
----------
K=13
----------

Speed control lever angle

Test data 106675-4651
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=26deg+-5deg b=10deg+-5deg

Stop lever angle

Test data 106675-4651
N:Pump normal S:Stop the pump. (1)Normal (2)Pump speed aa and rack position bb (to be sealed at delivery)
----------
aa=0r/min bb=1-0.5mm
----------
a=25deg+-5deg b=70deg+-5deg

Timing setting

Test data 106675-4651
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(70deg)




Have questions with 106675-4651?





Group cross 106675-4651 ZEXEL

Komatsu 

9 400 617 407 
6152711452 
INJECTION-PUMP ASSEMBLY
SA6D125

Dpico 

F 019 Z20 142 
 
INJECTION-PUMP ASSEMBLY
D2366T
F 019 Z20 143 
 
INJECTION-PUMP ASSEMBLY
D2366

Komatsu 

9 400 611 338 
6211721170 
INJECTION-PUMP ASSEMBLY
SA6D140
9 400 611 956 
6211721150 
INJECTION-PUMP ASSEMBLY
SA6D140

Daewoo 

9 400 612 934 
 
INJECTION-PUMP ASSEMBLY
DE12TI
106675-4651  
9 400 613 208 
 
INJECTION-PUMP ASSEMBLY
DE12TI
 
 
INJECTION-PUMP ASSEMBLY
D1146TI
9 400 612 079 
 
INJECTION-PUMP ASSEMBLY
D1146TI
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

 
6152721910 
INJECTION-PUMP ASSEMBLY
SA6D125
 
 
INJECTION-PUMP ASSEMBLY
SA6D125

Komatsu 

9 400 617 408 
6152721911 
INJECTION-PUMP ASSEMBLY
SA6D125

Dpico 

F 019 Z20 144 
 
INJECTION-PUMP ASSEMBLY
DE12TI
Back to top