106675-4470 ZEXEL 9 400 619 775 BOSCH INJECTION-PUMP ASSEMBLY 9400619775 1066754470


106675-4470 INJECTION-PUMP ASSEMBLY
Rating:
23
Buy INJECTION-PUMP ASSEMBLY 106675-4470 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 619 775 9400619775
ZEXEL 106675-4470 1066754470

Service parts 106675-4470 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-1130
3. GOVERNOR 105488-2410
4. SUPPLY PUMP 105217-6030
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105664-0431
7. COUPLING PLATE 156637-2820
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105111-4540
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 27.5{280}
13. NOZZLE-HOLDER 105041-7130
14. NOZZLE 105025-0120
15. NOZZLE SET

Include in #1:

106675-4470 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 619 775 9400619775
ZEXEL 106675-4470 1066754470


Zexel num
Bosch num
Firm num
Name
106675-4470 
106675-4471 
9 400 619 775 
   
INJECTION-PUMP ASSEMBLY
SA6D125E * K 14CA PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-1520
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.8 3.75 3.85
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.1
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   198.5 194.5 202.5
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Boost pressure kPa   40 40
Boost pressure mmHg   300 300
Injection quantity adjustment_02
Adjusting point   C
Rack position   5.8+-0.5
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   13 11.5 14.5
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Boost compensator adjustment
Pump speed r/min   700 700 700
Rack position   8
Boost pressure kPa   6.7 5.4 8
Boost pressure mmHg   50 40 60
Boost compensator adjustment_02
Pump speed r/min   700 700 700
Rack position   R1(10.1)
Boost pressure kPa   26.7 20 33.4
Boost pressure mmHg   200 150 250

Test data Ex:

Governor adjustment

Test data 106675-4470
N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Tolerance for racks not indicated: +-0.05mm. (4)Boost compensator cancel stroke: BSL (5)Deliver without the torque control spring operating. (6)Damper spring setting (7)Boost compensator stroke: BCL
----------
RT=1 TH=1.9mm BSL=2.4mm BCL=(2.1)mm
----------

Speed control lever angle

Test data 106675-4470
F:Full speed
----------

----------
a=19.5deg+-5deg

0000000901

Test data 106675-4470
F:Full load I:Idle (1)Use the pin at R = aa (2)Stopper bolt setting
----------
aa=50mm
----------
a=26deg+-3deg b=24deg+-5deg

Stop lever angle

Test data 106675-4470
N:Pump normal S:Stop the pump. (1)Use the hole at R = aa
----------
aa=26mm
----------
a=37deg+-5deg b=73deg+-5deg

Timing setting

Test data 106675-4470
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(150deg)




Have questions with 106675-4470?





Group cross 106675-4470 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 617 394 
6211721310 
INJECTION-PUMP ASSEMBLY
S6D140
 
6211711490 
INJECTION-PUMP ASSEMBLY
S6D140
 
6211711491 
INJECTION-PUMP ASSEMBLY
S6D140
 
 
INJECTION-PUMP ASSEMBLY
S6D140

Komatsu 

9 400 617 395 
6211711492 
INJECTION-PUMP ASSEMBLY
S6D140
F 01G 09U 1C6 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 611 536 
6211721470 
INJECTION-PUMP ASSEMBLY
S6D140
 
6152721240 
INJECTION-PUMP ASSEMBLY
SA6D125
9 400 612 703 
6152721241 
INJECTION-PUMP ASSEMBLY
SA6D125
 
 
INJECTION-PUMP ASSEMBLY
F 019 Z20 141 
 
INJECTION-PUMP ASSEMBLY
S6D140

Komatsu 

9 400 617 396 
6211721320 
INJECTION-PUMP ASSEMBLY
S6D140

Daewoo 

 
 
INJECTION-PUMP ASSEMBLY
D2366T
 
 
INJECTION-PUMP ASSEMBLY
D2366T
9 400 617 397 
 
INJECTION-PUMP ASSEMBLY
D2366T

Komatsu 

 
6211711750 
INJECTION-PUMP ASSEMBLY
S6D140
9 400 617 398 
6211711751 
INJECTION-PUMP ASSEMBLY
S6D140
106675-4470  

106675-4471 
9 400 619 775 
 
INJECTION-PUMP ASSEMBLY
SA6D125E

Komatsu 

9 400 617 399 
6152721410 
INJECTION-PUMP ASSEMBLY
SA6D125E
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

 
6152721150 
INJECTION-PUMP ASSEMBLY
SA6D125
9 400 617 400 
6152721151 
INJECTION-PUMP ASSEMBLY
SA6D125
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
SA6D125
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 617 401 
6152712750 
INJECTION-PUMP ASSEMBLY
SA6D125
Back to top