106675-4292 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066754292


106675-4292 INJECTION-PUMP ASSEMBLY
Rating:
72
Buy INJECTION-PUMP ASSEMBLY 106675-4292 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106675-4292 1066754292

Service parts 106675-4292 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-0592
3. GOVERNOR 105407-5910
4. SUPPLY PUMP 105217-6030
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105663-0510
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105111-4560
11. Nozzle and Holder 6152-12-3200
12. Open Pre:MPa(Kqf/cm2) 27.5{280}
13. NOZZLE-HOLDER 105041-7130
14. NOZZLE 105025-0680
15. NOZZLE SET

Include in #1:

106675-4292 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106675-4292 1066754292


Zexel num
Bosch num
Firm num
Name
106675-4292 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8130
Bosch type code   EFEP215A
Nozzle   105780-0050
Bosch type code   DN6TD119NP1T
Nozzle holder   105780-2090
Bosch type code   EFEP215
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-1520
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.8 3.75 3.85
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.7
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   323 320 326
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   5.5+-0.5
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   16.5 15 18
Max. variation between cylinders %   0 -15 15
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 106675-4292
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Main spring setting (4)Set idle sub-spring
----------
K=7
----------

Speed control lever angle

Test data 106675-4292
F:Full speed I:Idle (1)Set the pump speed at aa (2)Set the pump speed at bb. (3)Stopper bolt setting
----------
aa=900r/min bb=750r/min
----------
a=(7deg)+-5deg b=(19deg)+-5deg c=(5deg)+-5deg

Stop lever angle

Test data 106675-4292
N:Pump normal S:Stop the pump. (1)At hole above left hand side R = aa (2)No return spring
----------
aa=27mm
----------
a=26.5deg+-5deg b=53deg+-5deg

Timing setting

Test data 106675-4292
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(150deg)




Have questions with 106675-4292?





Group cross 106675-4292 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

 
6152721390 
INJECTION-PUMP ASSEMBLY
SA6D125E
106675-4292  
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 613 142 
6152721391 
INJECTION-PUMP ASSEMBLY
SA6D125E
9 400 612 124 
6152721392 
INJECTION-PUMP ASSEMBLY
SA6D125E
Back to top