106675-4080 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066754080


106675-4080 INJECTION-PUMP ASSEMBLY
Rating:
12
Buy INJECTION-PUMP ASSEMBLY 106675-4080 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106675-4080 1066754080

Cross reference number

ZEXEL 106675-4080 1066754080


Zexel num
Bosch num
Firm num
Name
106675-4080 
106675-4083 
 
  DAEWOO
INJECTION-PUMP ASSEMBLY
D2366 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4420
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9
Pump speed r/min   950 950 950
Average injection quantity mm3/st.   113.3 111.3 115.3
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   9
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   110.6 104.6 116.6
Max. variation between cylinders %   0 -3 3
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   6.3
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   13.5 10.5 16.5
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   155 155 165
Fixing the lever   *
Rack limit   *

Test data Ex:

Governor adjustment

Test data 106675-4080
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)The torque control spring does not operate. (3)RACK LIMIT (4)Idle sub spring setting: L1.
----------
K=16 L1=3.7+-0.1mm
----------

Speed control lever angle

Test data 106675-4080
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(21deg)+-5deg b=(9deg)+-5deg

Stop lever angle

Test data 106675-4080
N:Pump normal S:Stop the pump.
----------

----------
a=19deg+-5deg b=53deg+-5deg

Timing setting

Test data 106675-4080
(1)Pump vertical direction (2)Coupling's key groove position for the No. 6 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(70deg)




Have questions with 106675-4080?





Group cross 106675-4080 ZEXEL

Komatsu 

9 400 611 337 
6127711034 
INJECTION-PUMP ASSEMBLY
S6D155
9 400 613 031 
6127711053 
INJECTION-PUMP ASSEMBLY
S6D155
9 400 610 376 
6127711153 
INJECTION-PUMP ASSEMBLY
S6D155
9 400 617 375 
6127711324 
INJECTION-PUMP ASSEMBLY
S6D155
9 400 612 229 
6128711036 
INJECTION-PUMP ASSEMBLY
SA6D155
9 400 611 792 
6128711055 
INJECTION-PUMP ASSEMBLY
SA6D155
9 400 617 376 
6128711063 
INJECTION-PUMP ASSEMBLY
SA6D155
9 400 617 377 
6128711122 
INJECTION-PUMP ASSEMBLY
SA6D155

Daewoo 

106675-4080  

106675-4083 
 
 
INJECTION-PUMP ASSEMBLY
D2366
 
 
INJECTION-PUMP ASSEMBLY
D2366
 
 
INJECTION-PUMP ASSEMBLY
D2366
9 400 610 956 
 
INJECTION-PUMP ASSEMBLY
D2366

Komatsu 

9 400 617 378 
6222711420 
INJECTION-PUMP ASSEMBLY
SA6D108
Back to top