Fuel injectors
  1. Home
  2. injection
  3. #1066744100

106674-4100 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066744100 3266572080


106674-4100 INJECTION-PUMP ASSEMBLY
Rating:
14
Buy INJECTION-PUMP ASSEMBLY 106674-4100 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106674-4100 1066744100
MITSUBISHI-HEAV 3266572080 3266572080

Service parts 106674-4100 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106061-7210
3. GOVERNOR
4. SUPPLY PUMP 105207-1320
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105664-0420
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-5371
11. Nozzle and Holder 32561-66050
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-4761
14. NOZZLE 105015-7010
15. NOZZLE SET

Include in #1:

106674-4100 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106674-4100 1066744100
MITSUBISHI-HEAV 3266572080 3266572080


Zexel num
Bosch num
Firm num
Name
106674-4100 
106674-4101 
 
3266572080  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S12A2 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8130
Bosch type code   EFEP215A
Nozzle   105780-0050
Bosch type code   DN6TD119NP1T
Nozzle holder   105780-2090
Bosch type code   EFEP215
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve   131424-7420
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left   L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left   L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.9 3.85 3.95
Rack position
Point A   R=A
Beginning of injection position
Opposite to the driving side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   15
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   464 455 473
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   6+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   28.5 25.5 31.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   -
Rack position   20+1
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   355 305 405
Fixing the rack   *

Test data Ex:

Timing setting

Test data 106674-4100
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(20deg)




Have questions with 106674-4100?





Group cross 106674-4100 ZEXEL

Mitsubishi-Heav 

106674-4100  

106674-4101 
 
3266572080 
INJECTION-PUMP ASSEMBLY
S12A2
106674-4101  

106674-4102 
 
3266582080 
INJECTION-PUMP ASSEMBLY
S12A2
106674-4102  

106674-4103 
 
3266592080 
INJECTION-PUMP ASSEMBLY
S12A2
106674-4103  

106674-4104 
9 400 611 932 
3266502080 
INJECTION-PUMP ASSEMBLY
S12A2
106674-4104  
9 400 612 806 
3266512080 
INJECTION-PUMP ASSEMBLY
S12A2
Back to top