Fuel injectors
  1. Home
  2. injection
  3. #1066744080

106674-4080 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066744080 3256532030


106674-4080 INJECTION-PUMP ASSEMBLY
Rating:
8
Buy INJECTION-PUMP ASSEMBLY 106674-4080 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106674-4080 1066744080
MITSUBISHI-HEAV 3256532030 3256532030

Service parts 106674-4080 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106061-7180
3. GOVERNOR
4. SUPPLY PUMP 105207-1320
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105664-0420
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-6661
11. Nozzle and Holder 32561-69010
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-4761
14. NOZZLE 105015-4850
15. NOZZLE SET

Include in #1:

106674-4080 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106674-4080 1066744080
MITSUBISHI-HEAV 3256532030 3256532030


Zexel num
Bosch num
Firm num
Name
106674-4080 
106674-4081 
 
3256532030  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S6A2 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8130
Bosch type code   EFEP215A
Nozzle   105780-0050
Bosch type code   DN6TD119NP1T
Nozzle holder   105780-2090
Bosch type code   EFEP215
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve   131424-7420
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left   L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left   L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.9 3.85 3.95
Rack position
Point A   R=A
Beginning of injection position
Opposite to the driving side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   15.4
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   428 419 437
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.3+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   27 24 30
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   20+1
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   354 304 404
Fixing the rack   *

Test data Ex:

Timing setting

Test data 106674-4080
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(20deg)




Have questions with 106674-4080?





Group cross 106674-4080 ZEXEL

Mitsubishi-Heav 

106674-4080  

106674-4081 
 
3256532030 
INJECTION-PUMP ASSEMBLY
S6A2
106674-4081  

106674-4082 
 
3256542030 
INJECTION-PUMP ASSEMBLY
S6A2
106674-4082  

106674-4083 
 
3256552030 
INJECTION-PUMP ASSEMBLY
S6A2
106674-4083  

106674-4084 
 
3256562030 
INJECTION-PUMP ASSEMBLY
S6A2
106674-4084  
9 400 617 371 
3256572030 
INJECTION-PUMP ASSEMBLY
S6A2
Back to top