106673-7790 ZEXEL 9 400 611 839 BOSCH INJECTION-PUMP ASSEMBLY 9400611839 1066737790 me158421


106673-7790 INJECTION-PUMP ASSEMBLY
Rating:
19
Buy INJECTION-PUMP ASSEMBLY 106673-7790 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 839 9400611839
ZEXEL 106673-7790 1066737790
MITSUBISHI ME158421 me158421

Service parts 106673-7790 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-1430
3. GOVERNOR 105407-6640
4. SUPPLY PUMP 105207-1200
5. AUTOM. ADVANCE MECHANIS 105681-2300
6. COUPLING PLATE 105663-0550
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-7110
11. Nozzle and Holder ME056473
12. Open Pre:MPa(Kqf/cm2) 17.7{180}/21.6{220}
13. NOZZLE-HOLDER 105031-4530
14. NOZZLE 105015-6150
15. NOZZLE SET

Include in #1:

106673-7790 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 611 839 9400611839
ZEXEL 106673-7790 1066737790
MITSUBISHI ME158421 me158421


Zexel num
Bosch num
Firm num
Name
106673-7790 
106676-2570 
9 400 611 839 
ME158421  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D24TE K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.5
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   160 157 163
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Boost pressure kPa   29.3 29.3
Boost pressure mmHg   220 220
Injection quantity adjustment_02
Adjusting point   B
Rack position   6+-0.5
Pump speed r/min   425 425 425
Average injection quantity mm3/st.   8 5.4 10.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Boost compensator adjustment
Pump speed r/min   750 750 750
Rack position   R1-1.6
Boost pressure kPa   4 1.3 6.7
Boost pressure mmHg   30 10 50
Boost compensator adjustment_02
Pump speed r/min   750 750 750
Rack position   R1(10.5)
Boost pressure kPa   16 16 16
Boost pressure mmHg   120 120 120
Timer adjustment
Pump speed r/min   0
Advance angle deg.   2.5 2 3
Timer adjustment_02
Pump speed r/min   300
Advance angle deg.   2.5 2 3
Remarks
Start
 
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   0 0 0
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106673-7790
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)At excess fuel lever operation (at boost pressure 0): L1 (4)Set idle sub-spring (5)Main spring setting (6)Boost compensator stroke (7)Rack difference between N = N1 and N = N2
----------
K=8 L1=10.4+-0.1mm N1=900r/min N2=300r/min
----------

Speed control lever angle

Test data 106673-7790
F:Full speed I:Idle (1)Stopper bolt setting (2)Set the pump speed at aa (3)Set the pump speed at bb.
----------
aa=760r/min bb=920r/min
----------
a=(0deg)+-5deg b=(19deg)+-5deg c=(5deg)+-5deg

Stop lever angle

Test data 106673-7790
N:Pump normal S:Stop the pump.
----------

----------
a=43.5deg+-5deg b=53deg+-5deg

0000001101

Test data 106673-7790
N:Normal B:When boosted (1)Rack position = aa (point D) at boost pressure 0.
----------
aa=10.4+-0.1mm
----------
a=(18deg) b=(4deg)

Timing setting

Test data 106673-7790
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(6deg)




Have questions with 106673-7790?





Group cross 106673-7790 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 351 
ME152267 
INJECTION-PUMP ASSEMBLY
6D24T1
9 400 617 352 
ME152404 
INJECTION-PUMP ASSEMBLY
6D24
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 791 
ME152268 
INJECTION-PUMP ASSEMBLY
6D24T1
9 400 610 949 
ME158417 
INJECTION-PUMP ASSEMBLY
6D22TC
9 400 610 950 
ME158415 
INJECTION-PUMP ASSEMBLY
6D22TC
9 400 617 353 
ME158239 
INJECTION-PUMP ASSEMBLY
6D24T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 951 
ME152504 
INJECTION-PUMP ASSEMBLY
6D24T1
9 400 617 354 
ME152516 
INJECTION-PUMP ASSEMBLY
6D24T1
9 400 617 355 
ME152450 
INJECTION-PUMP ASSEMBLY
6D24T1
106673-7790  

106676-2570 
9 400 611 839 
ME158421 
INJECTION-PUMP ASSEMBLY
6D24TE
Back to top