106673-7740 ZEXEL 9 400 610 950 BOSCH INJECTION-PUMP ASSEMBLY 9400610950 1066737740 me158415


106673-7740 INJECTION-PUMP ASSEMBLY
Rating:
13
Buy INJECTION-PUMP ASSEMBLY 106673-7740 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 950 9400610950
ZEXEL 106673-7740 1066737740
MITSUBISHI ME158415 me158415

Service parts 106673-7740 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-1370
3. GOVERNOR 105407-6580
4. SUPPLY PUMP 105207-1200
5. AUTOM. ADVANCE MECHANIS 105636-1700
6. COUPLING PLATE 105662-0710
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-7110
11. Nozzle and Holder ME056473
12. Open Pre:MPa(Kqf/cm2) 17.7{180}/21.6{220}
13. NOZZLE-HOLDER 105031-4530
14. NOZZLE 105015-6150
15. NOZZLE SET

Include in #1:

106673-7740 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 950 9400610950
ZEXEL 106673-7740 1066737740
MITSUBISHI ME158415 me158415


Zexel num
Bosch num
Firm num
Name
106673-7740 
9 400 610 950 
ME158415  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D22TC K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.5
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   160 157 163
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   6+-0.5
Pump speed r/min   425 425 425
Average injection quantity mm3/st.   8 5.4 10.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   D
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   130 130 140
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   900++
Advance angle deg.   0 0 0
Remarks
Do not advance until starting N = 900.
 
Timer adjustment_02
Pump speed r/min   900
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   2 2 2
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106673-7740
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting (6)Rack difference between N = N1 and N = N2
----------
K=8 N1=900r/min N2=300r/min
----------

Speed control lever angle

Test data 106673-7740
F:Full speed I:Idle (1)Stopper bolt setting (2)Set the pump speed at aa (3)Set the pump speed at bb.
----------
aa=760r/min bb=920r/min
----------
a=(1deg)+-5deg b=(20deg)+-5deg c=(5deg)+-5deg

Stop lever angle

Test data 106673-7740
N:Pump normal S:Stop the pump. (1)At delivery
----------

----------
a=39deg+-5deg b=53deg+-5deg

Timing setting

Test data 106673-7740
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=13deg
----------
a=(7deg)




Have questions with 106673-7740?





Group cross 106673-7740 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 351 
ME152267 
INJECTION-PUMP ASSEMBLY
6D24T1
9 400 617 352 
ME152404 
INJECTION-PUMP ASSEMBLY
6D24
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 791 
ME152268 
INJECTION-PUMP ASSEMBLY
6D24T1
9 400 610 949 
ME158417 
INJECTION-PUMP ASSEMBLY
6D22TC
106673-7740  
9 400 610 950 
ME158415 
INJECTION-PUMP ASSEMBLY
6D22TC
9 400 617 353 
ME158239 
INJECTION-PUMP ASSEMBLY
6D24T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 951 
ME152504 
INJECTION-PUMP ASSEMBLY
6D24T1
9 400 617 354 
ME152516 
INJECTION-PUMP ASSEMBLY
6D24T1
9 400 617 355 
ME152450 
INJECTION-PUMP ASSEMBLY
6D24T1
9 400 611 839 
ME158421 
INJECTION-PUMP ASSEMBLY
6D24TE
Back to top