106673-7680 ZEXEL 9 400 611 273 BOSCH INJECTION-PUMP ASSEMBLY 9400611273 1066737680 me158373


106673-7680 INJECTION-PUMP ASSEMBLY
Rating:
25
Buy INJECTION-PUMP ASSEMBLY 106673-7680 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 273 9400611273
ZEXEL 106673-7680 1066737680
MITSUBISHI ME158373 me158373

Service parts 106673-7680 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-1251
3. GOVERNOR 105408-0890
4. SUPPLY PUMP 105207-1200
5. AUTOM. ADVANCE MECHANIS 105636-2750
6. COUPLING PLATE 105663-0910
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105110-7510
11. Nozzle and Holder ME158200
12. Open Pre:MPa(Kqf/cm2) 17.7{180}/21.6{220}
13. NOZZLE-HOLDER 105041-4130
14. NOZZLE
15. NOZZLE SET 105019-0680

Include in #1:

106673-7680 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 611 273 9400611273
ZEXEL 106673-7680 1066737680
MITSUBISHI ME158373 me158373


Zexel num
Bosch num
Firm num
Name
106673-7680 
9 400 611 273 
ME158373  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D24 K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.1
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   85 82 88
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   6.5+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   9.5 6.9 12.1
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   D
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   100 90 110
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   650--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   600
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1000
Advance angle deg.   2.5 2 3
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106673-7680
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Torque spring does not operate. (4)RACK LIMIT (5)The torque control spring must does not have a set force. (6)Idle sub spring setting: L1.
----------
K=15 L1=4.5-0.5mm
----------

Speed control lever angle

Test data 106673-7680
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(22deg)+-5deg b=(8deg)+-5deg

Stop lever angle

Test data 106673-7680
N:Pump normal S:Stop the pump.
----------

----------
a=19deg+-5deg b=53deg+-5deg

Timing setting

Test data 106673-7680
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=13deg
----------
a=(7deg)




Have questions with 106673-7680?





Group cross 106673-7680 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 719 
ME158316 
INJECTION-PUMP ASSEMBLY
6D24
F 01G 09U 08Y 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 945 
ME158300 
INJECTION-PUMP ASSEMBLY
6D24T
9 400 617 349 
ME158295 
INJECTION-PUMP ASSEMBLY
6D22T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 336 
ME158333 
INJECTION-PUMP ASSEMBLY
6D24TC
F 019 Z20 137 
ME442606 
INJECTION-PUMP ASSEMBLY
6D24TC
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 350 
ME158332 
INJECTION-PUMP ASSEMBLY
6D24T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 613 160 
ME158301 
INJECTION-PUMP ASSEMBLY
6D24TC
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 946 
ME158335 
INJECTION-PUMP ASSEMBLY
6D24T
9 400 610 947 
ME158319 
INJECTION-PUMP ASSEMBLY
6D24TC
106673-7680  
9 400 611 273 
ME158373 
INJECTION-PUMP ASSEMBLY
6D24
9 400 610 948 
ME158355 
INJECTION-PUMP ASSEMBLY
6D24T
Back to top