106673-7652 ZEXEL 9 400 613 160 BOSCH INJECTION-PUMP ASSEMBLY 9400613160 1066737652 me158301


106673-7652 INJECTION-PUMP ASSEMBLY
Rating:
21
Buy INJECTION-PUMP ASSEMBLY 106673-7652 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 613 160 9400613160
ZEXEL 106673-7652 1066737652
MITSUBISHI ME158301 me158301

Service parts 106673-7652 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-0880
3. GOVERNOR 105407-6571
4. SUPPLY PUMP 105207-1200
5. AUTOM. ADVANCE MECHANIS 105636-2520
6. COUPLING PLATE 105663-0550
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-7110
11. Nozzle and Holder ME056473
12. Open Pre:MPa(Kqf/cm2) 17.7{180}/21.6{220}
13. NOZZLE-HOLDER 105031-4530
14. NOZZLE 105015-6150
15. NOZZLE SET

Include in #1:

106673-7652 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 613 160 9400613160
ZEXEL 106673-7652 1066737652
MITSUBISHI ME158301 me158301


Zexel num
Bosch num
Firm num
Name
106673-7652 
9 400 613 160 
ME158301  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D24TC K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 255 255
Overflow valve opening pressure kgf/cm2   2.6 2.6 2.6
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.6
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   168.5 165.5 171.5
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Boost pressure kPa   36 36
Boost pressure mmHg   270 270
Injection quantity adjustment_02
Adjusting point   B
Rack position   6+-0.5
Pump speed r/min   425 425 425
Average injection quantity mm3/st.   8 5.4 10.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_03
Adjusting point   D
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   195 175 215
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   600 600 600
Rack position   R1-1.65
Boost pressure kPa   4 2.7 5.3
Boost pressure mmHg   30 20 40
Boost compensator adjustment_02
Pump speed r/min   600 600 600
Rack position   R1-0.25
Boost pressure kPa   20 13.3 26.7
Boost pressure mmHg   150 100 200
Boost compensator adjustment_03
Pump speed r/min   600 600 600
Rack position   R1(10.6)
Boost pressure kPa   22.7 22.7 22.7
Boost pressure mmHg   170 170 170
Timer adjustment
Pump speed r/min   825--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   775
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   975
Advance angle deg.   1 0.5 1.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106673-7652
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting (6)Boost compensator stroke
----------
K=11
----------

Speed control lever angle

Test data 106673-7652
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(20deg)+-5deg b=(4deg)+-5deg

Stop lever angle

Test data 106673-7652
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery) (2)Stopper bolt setting
----------
aa=0r/min bb=1-0.5mm
----------
a=35deg+-5deg b=70deg+-5deg

Timing setting

Test data 106673-7652
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=13deg
----------
a=(7deg)




Have questions with 106673-7652?





Group cross 106673-7652 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 719 
ME158316 
INJECTION-PUMP ASSEMBLY
6D24
F 01G 09U 08Y 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 945 
ME158300 
INJECTION-PUMP ASSEMBLY
6D24T
9 400 617 349 
ME158295 
INJECTION-PUMP ASSEMBLY
6D22T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 336 
ME158333 
INJECTION-PUMP ASSEMBLY
6D24TC
F 019 Z20 137 
ME442606 
INJECTION-PUMP ASSEMBLY
6D24TC
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 350 
ME158332 
INJECTION-PUMP ASSEMBLY
6D24T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

106673-7652  
9 400 613 160 
ME158301 
INJECTION-PUMP ASSEMBLY
6D24TC
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 946 
ME158335 
INJECTION-PUMP ASSEMBLY
6D24T
9 400 610 947 
ME158319 
INJECTION-PUMP ASSEMBLY
6D24TC
9 400 611 273 
ME158373 
INJECTION-PUMP ASSEMBLY
6D24
9 400 610 948 
ME158355 
INJECTION-PUMP ASSEMBLY
6D24T
Back to top