106673-7370 ZEXEL 9 400 610 931 BOSCH INJECTION-PUMP ASSEMBLY 9400610931 1066737370 me152100

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106673-7370 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 931 9400610931

ZEXEL 106673-7370 1066737370

MITSUBISHI ME152100 me152100

Service parts 106673-7370 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106061-5480

3. GOVERNOR 105487-7070

4. SUPPLY PUMP 105217-6050

5. AUTOM. ADVANCE MECHANIS 105636-1310

6. COUPLING PLATE 105662-0710

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-7730

11. Nozzle and Holder ME056804

12. Open Pre:MPa(Kqf/cm2) 17.7{180}/24.5{250}

13. NOZZLE-HOLDER 105031-4530

14. NOZZLE

105015-6150

15. NOZZLE SET

Include in #1:

106673-7370 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 931 9400610931

ZEXEL 106673-7370 1066737370

MITSUBISHI ME152100 me152100

Zexel num

Bosch num

Firm num

Name

106673-7370

9 400 610 931

ME152100 MITSUBISHI

INJECTION-PUMP ASSEMBLY
6D22T2 * K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 131424-4620

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 4.8 4.75 4.85

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point -

Rack position 8.8

Pump speed r/min 700 700 700

Each cylinder's injection qty mm3/st. 128 124.8 131.2

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point F

Rack position 5+-0.5

Pump speed r/min 500 500 500

Each cylinder's injection qty mm3/st. 16.5 14 19

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(8.8)

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 128 127 129

Basic *

Fixing the lever *

Boost pressure kPa 44.7 44.7

Boost pressure mmHg 335 335

Injection quantity adjustment_04

Adjusting point C

Rack position 5.7+-0.5

Pump speed r/min 225 225 225

Average injection quantity mm3/st. 16.5 14 19

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Remarks
(check)

Injection quantity adjustment_05

Adjusting point D

Rack position R2(R1-0. 9)

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 105 101.6 108.4

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_06

Adjusting point E

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 110 90 130

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 600 600 600

Rack position R2(R1-0. 9)

Boost pressure kPa 6 6 6

Boost pressure mmHg 45 45 45

Boost compensator adjustment_02

Pump speed r/min 600 600 600

Rack position R2+0.65

Boost pressure kPa 19.3 12.6 26

Boost pressure mmHg 145 95 195

Boost compensator adjustment_03

Pump speed r/min 600 600 600

Rack position R1(8.8)

Boost pressure kPa 31.3 31.3 31.3

Boost pressure mmHg 235 235 235

Timer adjustment

Pump speed r/min 450--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 400

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 600

Advance angle deg. 1.5 1 2

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Tolerance for racks not indicated: +-0.05mm. (4)Boost compensator cancel stroke: BSL (5)Boost compensator stroke: BCL (6)Damper spring setting
----------
RT=1 TH=2.7mm BSL=1.2mm BCL=(0.9)+-0.1mm
----------

Speed control lever angle

F:Full speed
----------

----------
a=(17.5deg)+-5deg

0000000901

F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=26deg+-3deg b=28deg+-5deg

Stop lever angle

S:Stop the pump. (1)Rack position = aa, stopper bolt setting (2)Free (at delivery)
----------
aa=4.1-0.5mm
----------
a=38deg+-5deg b=36.5deg+7deg-5deg

0000001501 MICRO SWITCH

Adjustment of the micro-switch Adjust the bolt to obtain the following lever position when the micro-switch is ON. (1)Speed N1 (2)Rack position Ra
----------
N1=325r/min Ra=5.4+-0.1mm
----------