106673-7361 ZEXEL 9 400 610 930 BOSCH INJECTION-PUMP ASSEMBLY 9400610930 1066737361 me158175


106673-7361 INJECTION-PUMP ASSEMBLY
Rating:
34
Buy INJECTION-PUMP ASSEMBLY 106673-7361 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 930 9400610930
ZEXEL 106673-7361 1066737361
MITSUBISHI ME158175 me158175

Service parts 106673-7361 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-0470
3. GOVERNOR 105407-6111
4. SUPPLY PUMP 105207-1200
5. AUTOM. ADVANCE MECHANIS 105681-2150
6. COUPLING PLATE 105663-0910
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-4260
11. Nozzle and Holder ME158069
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-3970
14. NOZZLE 105025-0560
15. NOZZLE SET

Include in #1:

106673-7361 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 930 9400610930
ZEXEL 106673-7361 1066737361
MITSUBISHI ME158175 me158175


Zexel num
Bosch num
Firm num
Name
106673-7361 
9 400 610 930 
ME158175  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D24T K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.8
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   114 111 117
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Boost pressure kPa   33.3 33.3
Boost pressure mmHg   250 250
Injection quantity adjustment_02
Adjusting point   C
Rack position   5.3+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   12.5 9.9 15.1
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_03
Adjusting point   E
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   135 115 155
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   500 500 500
Rack position   8.9
Boost pressure kPa   6.7 4 9.4
Boost pressure mmHg   50 30 70
Boost compensator adjustment_02
Pump speed r/min   500 500 500
Rack position   9.9
Boost pressure kPa   20 13.3 26.7
Boost pressure mmHg   150 100 200
Timer adjustment
Pump speed r/min   0
Advance angle deg.   2.5 2 3
Timer adjustment_02
Pump speed r/min   300
Advance angle deg.   2.5 2 3
Remarks
Start
 
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   0 0 0
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106673-7361
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Main spring setting (5)Set idle sub-spring (6)Boost compensator stroke (7)Rack difference between N = N1 and N = N2
----------
K=10 N1=1000r/min N2=500r/min
----------

Speed control lever angle

Test data 106673-7361
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=22deg+-5deg b=3deg+-5deg

Stop lever angle

Test data 106673-7361
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery) (2)Stopper bolt setting
----------
aa=0r/min bb=1-0.5mm
----------
a=35deg+-5deg b=70deg+-5deg

Timing setting

Test data 106673-7361
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(6deg)




Have questions with 106673-7361?





Group cross 106673-7361 ZEXEL

Mitsubishi 

9 400 617 336 
ME152000 
INJECTION-PUMP ASSEMBLY
6D22T2
9 400 617 337 
ME151986 
INJECTION-PUMP ASSEMBLY
6D24T1
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 338 
ME151946 
INJECTION-PUMP ASSEMBLY
6D24T1
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 929 
ME158180 
INJECTION-PUMP ASSEMBLY
6D22TC
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 339 
ME152019 
INJECTION-PUMP ASSEMBLY
6D24T1
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 838 
ME158173 
INJECTION-PUMP ASSEMBLY
6D24T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

106673-7361  
9 400 610 930 
ME158175 
INJECTION-PUMP ASSEMBLY
6D24T
9 400 610 931 
ME152100 
INJECTION-PUMP ASSEMBLY
6D22T2
 
 
INJECTION-PUMP ASSEMBLY
9 400 610 932 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 340 
ME152089 
INJECTION-PUMP ASSEMBLY
6D24T1
9 400 619 456 
 
INJECTION-PUMP ASSEMBLY
9 400 619 457 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 933 
ME158216 
INJECTION-PUMP ASSEMBLY
6D24TC
Back to top