106673-7272 ZEXEL 9 400 610 927 BOSCH INJECTION-PUMP ASSEMBLY 9400610927 1066737272 me158152


106673-7272 INJECTION-PUMP ASSEMBLY
Rating:
17
Buy INJECTION-PUMP ASSEMBLY 106673-7272 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 927 9400610927
ZEXEL 106673-7272 1066737272
MITSUBISHI ME158152 me158152

Service parts 106673-7272 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-0600
3. GOVERNOR 105407-5782
4. SUPPLY PUMP 105207-1200
5. AUTOM. ADVANCE MECHANIS 105636-2590
6. COUPLING PLATE 105663-0550
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-7110
11. Nozzle and Holder ME056473
12. Open Pre:MPa(Kqf/cm2) 17.7{180}/21.6{220}
13. NOZZLE-HOLDER 105031-4530
14. NOZZLE 105015-6150
15. NOZZLE SET

Include in #1:

106673-7272 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 927 9400610927
ZEXEL 106673-7272 1066737272
MITSUBISHI ME158152 me158152


Zexel num
Bosch num
Firm num
Name
106673-7272 
9 400 610 927 
ME158152  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D24TC K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.7
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   140.5 137.5 143.5
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Boost pressure kPa   32 32
Boost pressure mmHg   240 240
Injection quantity adjustment_02
Adjusting point   B
Rack position   5+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   8.5 5.9 11.1
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_03
Adjusting point   D
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   125 105 145
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   600 600 600
Rack position   R1-1.25
Boost pressure kPa   4 2.7 5.3
Boost pressure mmHg   30 20 40
Boost compensator adjustment_02
Pump speed r/min   600 600 600
Rack position   R1(8.7)
Boost pressure kPa   18.7 12 25.4
Boost pressure mmHg   140 90 190
Timer adjustment
Pump speed r/min   950--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   900
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1100
Advance angle deg.   2 1.5 2.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106673-7272
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Main spring setting (5)Set idle sub-spring (6)Boost compensator stroke
----------
K=12
----------

Speed control lever angle

Test data 106673-7272
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(24deg)+-5deg b=(7deg)+-5deg

Stop lever angle

Test data 106673-7272
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery) (2)Stopper bolt setting
----------
aa=0r/min bb=1-0.5mm
----------
a=35deg+-5deg b=70deg+-5deg

Timing setting

Test data 106673-7272
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=13deg
----------
a=(7deg)




Have questions with 106673-7272?





Group cross 106673-7272 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 331 
ME151686 
INJECTION-PUMP ASSEMBLY
6D24T1
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 924 
ME151687 
INJECTION-PUMP ASSEMBLY
6D24T2
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 925 
ME158092 
INJECTION-PUMP ASSEMBLY
6D24T
9 400 617 332 
ME158088 
INJECTION-PUMP ASSEMBLY
6D24-TC
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 926 
ME158106 
INJECTION-PUMP ASSEMBLY
6D24T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 333 
ME158133 
INJECTION-PUMP ASSEMBLY
6D24-T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 334 
ME158137 
INJECTION-PUMP ASSEMBLY
6D24T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

106673-7272  
9 400 610 927 
ME158152 
INJECTION-PUMP ASSEMBLY
6D24TC
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 928 
ME151875 
INJECTION-PUMP ASSEMBLY
6D22T2
9 400 617 335 
ME158075 
INJECTION-PUMP ASSEMBLY
6D22T
Back to top