Fuel injectors
  1. Home
  2. injection
  3. #1066737184

106673-7184 ZEXEL 9 400 612 006 BOSCH INJECTION-PUMP ASSEMBLY 9400612006 1066737184 me158081


106673-7184 INJECTION-PUMP ASSEMBLY
Rating:
17
Buy INJECTION-PUMP ASSEMBLY 106673-7184 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 612 006 9400612006
ZEXEL 106673-7184 1066737184
MITSUBISHI ME158081 me158081

Service parts 106673-7184 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-1320
3. GOVERNOR 105407-5981
4. SUPPLY PUMP 105207-1200
5. AUTOM. ADVANCE MECHANIS 105681-2170
6. COUPLING PLATE 105663-0550
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105110-7550
11. Nozzle and Holder ME158263
12. Open Pre:MPa(Kqf/cm2) 17.7{180}/21.6{220}
13. NOZZLE-HOLDER 105041-4130
14. NOZZLE
15. NOZZLE SET 105019-0700

Include in #1:

106673-7184 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 612 006 9400612006
ZEXEL 106673-7184 1066737184
MITSUBISHI ME158081 me158081


Zexel num
Bosch num
Firm num
Name
106673-7184 
9 400 612 006 
ME158081  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D24T K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.2
Pump speed r/min   825 825 825
Average injection quantity mm3/st.   132 129 135
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Boost pressure kPa   50.7 50.7
Boost pressure mmHg   380 380
Injection quantity adjustment_02
Adjusting point   B
Rack position   4.4+-0.5
Pump speed r/min   425 425 425
Average injection quantity mm3/st.   9.5 6.9 12.1
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_03
Adjusting point   D
Rack position   10.3++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   145 135 155
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   700 700 700
Rack position   R1-0.7
Boost pressure kPa   22.7 21.4 24
Boost pressure mmHg   170 160 180
Boost compensator adjustment_02
Pump speed r/min   700 700 700
Rack position   R1(9.2)
Boost pressure kPa   37.3 30.6 44
Boost pressure mmHg   280 230 330
Timer adjustment
Pump speed r/min   0
Advance angle deg.   2.5 2 3
Timer adjustment_02
Pump speed r/min   300
Advance angle deg.   2.5 2 3
Remarks
Start  
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   0 0 0
Remarks
Measure the actual speed, stop  

Test data Ex:

Governor adjustment

Test data 106673-7184
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)The torque control spring must does not have a set force. (6)Main spring setting (7)Boost compensator stroke: BCL
----------
K=7 BCL=0.7+-0.1mm
----------

Speed control lever angle

Test data 106673-7184
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(4deg)+-5deg b=(16deg)+-5deg

Stop lever angle

Test data 106673-7184
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery) (2)Stopper bolt setting (3)Normal
----------
aa=0r/min bb=1-0.5mm
----------
a=35deg+-5deg b=70deg+-5deg

Timing setting

Test data 106673-7184
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(6deg)




Have questions with 106673-7184?





Group cross 106673-7184 ZEXEL

106673-7180  
 
 
INJECTION-PUMP ASSEMBLY
106673-7181  
 
 
INJECTION-PUMP ASSEMBLY
106673-7182  
 
 
INJECTION-PUMP ASSEMBLY
106673-7183  

106673-7184 
9 400 610 923 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

106673-7184  
9 400 612 006 
ME158081 
INJECTION-PUMP ASSEMBLY
6D24T
Back to top