106673-4190 ZEXEL F 019 Z20 132 BOSCH INJECTION-PUMP ASSEMBLY f019z20132 1066734190


106673-4190 INJECTION-PUMP ASSEMBLY
Rating:
37
Buy INJECTION-PUMP ASSEMBLY 106673-4190 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z20 132 f019z20132
ZEXEL 106673-4190 1066734190

Cross reference number

BOSCH F 019 Z20 132 f019z20132
ZEXEL 106673-4190 1066734190


Zexel num
Bosch num
Firm num
Name
106673-4190 
F 019 Z20 132 
  DPICO
INJECTION-PUMP ASSEMBLY
DE08TIS Q

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8250
Bosch type code   1 688 901 101
Nozzle   105780-0120
Bosch type code   1 688 901 990
Nozzle holder   105780-2190
Opening pressure MPa   20.7
Opening pressure kgf/cm2   211
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   134424-4120
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.9 3.85 3.95
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   13.4
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   136 134 138
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   Z
Rack position   8+-0.5
Pump speed r/min   440 440 440
Average injection quantity mm3/st.   16 14.5 17.5
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(13.4)
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   136 134 138
Basic   *
Fixing the lever   *
Boost pressure kPa   46.7 46.7
Boost pressure mmHg   350 350
Boost compensator adjustment
Pump speed r/min   500 500 500
Rack position   R2-1.6
Boost pressure kPa   18.7 17.4 20
Boost pressure mmHg   140 130 150
Boost compensator adjustment_02
Pump speed r/min   500 500 500
Rack position   R2(R1-1. 5)
Boost pressure kPa   33.3 33.3 33.3
Boost pressure mmHg   250 250 250
Timer adjustment
Pump speed r/min   750--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   700
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   930
Advance angle deg.   4 3.5 4.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106673-4190
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)Boost compensator stroke: BCL (4)Damper spring setting (5)Microswitch adjustment unnecessary.
----------
T1=AG99 BCL=1.6+-0.1mm
----------

Speed control lever angle

Test data 106673-4190
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H' (3)Viewed from feed pump side.
----------
aa=70mm
----------
a=14deg+-5deg b=40.5deg+-3deg

Stop lever angle

Test data 106673-4190
N:Pump normal S:Stop the pump. (1)Use the hole at R = aa (2)At pump speed bb and rack position cc, set the stopper bolt.
----------
aa=40mm bb=0r/min cc=1.5+-0.3mm
----------
a=44deg+-5deg b=20deg+-5deg

Timing setting

Test data 106673-4190
(1)Pump vertical direction (2)Coupling's key groove position for the No. 6 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(50deg)




Have questions with 106673-4190?





Group cross 106673-4190 ZEXEL

Dpico 

F 019 Z20 124 
 
INJECTION-PUMP ASSEMBLY
KK-TCI
F 019 Z20 125 
 
INJECTION-PUMP ASSEMBLY
KK-TCI
F 019 Z20 126 
 
INJECTION-PUMP ASSEMBLY
Q
F 019 Z20 127 
 
INJECTION-PUMP ASSEMBLY
KK-TCI
F 019 Z20 128 
 
INJECTION-PUMP ASSEMBLY
KK-TCI
F 019 Z20 129 
 
INJECTION-PUMP ASSEMBLY
KK-TCI
F 019 Z20 130 
 
INJECTION-PUMP ASSEMBLY
Q

Niigata-Urawa 

9 400 613 342 
75L47044A 
INJECTION-PUMP ASSEMBLY
DMF13HZA

Niigata-Tekkou 

9 400 617 311 
75L47044B 
INJECTION-PUMP ASSEMBLY
DMF13HZA
F 019 Z20 131 
75L47045A 
INJECTION-PUMP ASSEMBLY
DMF13HZA

Dpico 

106673-4190  
F 019 Z20 132 
 
INJECTION-PUMP ASSEMBLY
DE08TIS
Back to top