106673-2803 ZEXEL F 019 Z10 421 BOSCH INJECTION-PUMP ASSEMBLY f019z10421 1066732803

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106673-2803 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z10 421 f019z10421

ZEXEL 106673-2803 1066732803

Service parts 106673-2803 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106061-5480

3. GOVERNOR 105487-6510

4. SUPPLY PUMP 105207-1200

5. AUTOM. ADVANCE MECHANIS 105636-1950

6. COUPLING PLATE 105662-0710

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-7731

11. Nozzle and Holder ME056804

12. Open Pre:MPa(Kqf/cm2) 17.7{180}/24.5{250}

13. NOZZLE-HOLDER 105041-4420

14. NOZZLE

105015-6150

15. NOZZLE SET

Include in #1:

106673-2803 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 019 Z10 421 f019z10421

ZEXEL 106673-2803 1066732803

Zexel num

Bosch num

Firm num

Name

106673-2803
106673-2804

F 019 Z10 421

INJECTION-PUMP ASSEMBLY
* K 14CA PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 131424-4620

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 4.8 4.75 4.85

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point -

Rack position 10.2

Pump speed r/min 650 650 650

Each cylinder's injection qty mm3/st. 172.5 168.2 176.8

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point F

Rack position 4.3+-0.5

Pump speed r/min 500 500 500

Each cylinder's injection qty mm3/st. 9 7.9 10.1

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(10.2)

Pump speed r/min 650 650 650

Average injection quantity mm3/st. 172.5 171.5 173.5

Basic *

Fixing the lever *

Boost pressure kPa 51.3 51.3

Boost pressure mmHg 385 385

Injection quantity adjustment_04

Adjusting point B

Rack position R1-0.95

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 165 160.9 169.1

Difference in delivery mm3/st. 8.2 8.2 8.2

Fixing the lever *

Boost pressure kPa 51.3 51.3

Boost pressure mmHg 385 385

Injection quantity adjustment_05

Adjusting point D

Rack position R2(R1-2. 8)

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 106.5 104.5 108.5

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_06

Adjusting point C

Rack position 4.9+-0.5

Pump speed r/min 225 225 225

Each cylinder's injection qty mm3/st. 15 13.2 16.8

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Remarks
(check)

Injection quantity adjustment_07

Adjusting point E

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 90 50 130

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 500 500 500

Rack position R2(R1-2. 8)

Boost pressure kPa 3.3 3.3 5.3

Boost pressure mmHg 25 25 40

Boost compensator adjustment_02

Pump speed r/min 500 500 500

Rack position R1-0.2

Boost pressure kPa 16.7 15.4 18

Boost pressure mmHg 125 115 135

Boost compensator adjustment_03

Pump speed r/min 500 500 500

Rack position (10.6)

Boost pressure kPa 38 38 38

Boost pressure mmHg 285 285 285

Timer adjustment

Pump speed r/min 900--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 850

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1100

Advance angle deg. 1.5 1 2

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Tolerance for racks not indicated: +-0.05mm. (4)Boost compensator cancel stroke: BSL (5)RACK LIMIT: RAL (N = N1) (6)The torque control spring must does not have a set force. (7)Boost compensator stroke: BCL (N = N2 (8)Damper spring setting
----------
RT=1 TH=2.3mm BSL=4mm RAL=11+-0.1mm N1=250r/min BCL=(1.85)+-0.1mm N2=1000r/min
----------

Speed control lever angle

F:Full speed
----------

----------
a=15deg+-5deg

0000000901

F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=28deg+-5deg b=32.5deg+-3deg

Stop lever angle

N:Engine manufacturer's normal use S:Stop the pump. (1)Rack position = aa (2)Rack position = bb, set the stopper bolt. (3)Free (at delivery)
----------
aa=13.3mm bb=3-0.5mm
----------
a=(38deg) b=28.5deg+-5deg c=1.5deg+7deg-5deg

0000001501 MICRO SWITCH

Adjustment of the micro-switch Adjust the bolt to obtain the following lever position when the micro-switch is ON. (1)Speed N1 (2)Rack position Ra
----------
N1=325r/min Ra=4.6+-0.1mm
----------

Timing setting

(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(7deg)