106673-2740 ZEXEL 9 400 617 262 BOSCH INJECTION-PUMP ASSEMBLY 9400617262 1066732740 me150475

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106673-2740 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 262 9400617262

ZEXEL 106673-2740 1066732740

MITSUBISHI ME150475 me150475

Service parts 106673-2740 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106061-7930

3. GOVERNOR 105952-0700

4. SUPPLY PUMP 105207-1330

5. AUTOM. ADVANCE MECHANIS 105636-1990

6. COUPLING PLATE 105662-0710

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-7570

11. Nozzle and Holder ME150476

12. Open Pre:MPa(Kqf/cm2) 17.7{180}/21.6{220}

13. NOZZLE-HOLDER 105031-4530

14. NOZZLE 105015-9520

15. NOZZLE SET

Include in #1:

106673-2740 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 262 9400617262

ZEXEL 106673-2740 1066732740

MITSUBISHI ME150475 me150475

Zexel num

Bosch num

Firm num

Name

106673-2740

9 400 617 262

ME150475 MITSUBISHI

INJECTION-PUMP ASSEMBLY
6D22 K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 131424-8020

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

RED3 control unit part number 407910-2 470

RED3 rack sensor specifications mm 15

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 4.8 4.75 4.85

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Rack position (9.6)

Vist V 2.09 2.09 2.09

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 92.5 91.5 93.5

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Injection quantity adjustment_02

Rack position (6.6)

Vist V 2.7 2.6 2.8

Pump speed r/min 440 440 440

Average injection quantity mm3/st. 16 13.6 18.4

Max. variation between cylinders % 0 -15 15

Governor adjustment

Pump speed r/min 1000--

Advance angle deg. 0 0 0

Remarks
Start

Governor adjustment_02

Pump speed r/min 950

Advance angle deg. 0.5

Governor adjustment_03

Pump speed r/min 1050

Advance angle deg. 2.2 1.7 2.7

Governor adjustment_04

Pump speed r/min 1150

Advance angle deg. 5.5 5 6

Remarks
Finish

Test data Ex:

Speed control lever angle

N:Pump normal S:Stop the pump. (1)Rack position = aa (2)Rack position bb
----------
aa=16mm bb=1mm
----------
a=3deg+-5deg b=29deg+-5deg

0000000901

(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(6deg)

Stop lever angle

(Rs) rack sensor specifications (C/U) control unit part number (V) Rack sensor output voltage (R) Rack position (mm) 1. Confirming governor output characteristics (rack 15 mm, span 6 mm) (1)When the output voltages of the rack sensor are V1 and V2, check that the rack positions R1 and R2 in the table above are satisfied.
----------

----------