Fuel injectors
  1. Home
  2. injection
  3. #1066729460

106672-9460 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066729460 3256520220


106672-9460 INJECTION-PUMP ASSEMBLY
Rating:
69
Buy INJECTION-PUMP ASSEMBLY 106672-9460 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106672-9460 1066729460
MITSUBISHI-HEAV 3256520220 3256520220

Service parts 106672-9460 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106060-5370
3. GOVERNOR 105447-5660
4. SUPPLY PUMP 105207-1320
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105664-0420
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2)
13. NOZZLE-HOLDER
14. NOZZLE
15. NOZZLE SET

Include in #1:

106672-9460 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106672-9460 1066729460
MITSUBISHI-HEAV 3256520220 3256520220


Zexel num
Bosch num
Firm num
Name
106672-9460 
106672-9465 
 
3256520220  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S6A2 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8130
Bosch type code   EFEP215A
Nozzle   105780-0050
Bosch type code   DN6TD119NP1T
Nozzle holder   105780-2090
Bosch type code   EFEP215
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left   L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left   L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.9 3.85 3.95
Rack position
Point A   R=A
Beginning of injection position
Governor side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   15
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   330 321 339
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.1+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   22.5 19.5 25.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 106672-9460
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Idle sub spring setting: L1.
----------
K=(8) L1=5.5-0.5mm
----------

Speed control lever angle

Test data 106672-9460
F:Full speed S:Stop
----------

----------
a=(15deg)+-5deg b=32deg+-3deg

0000000901

Test data 106672-9460
F:Full load I:Idle S:Stop
----------

----------
a=7deg+-5deg b=(28deg)+-5deg c=37deg+-5deg

Timing setting

Test data 106672-9460
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(20deg)




Have questions with 106672-9460?





Group cross 106672-9460 ZEXEL

Mitsubishi-Heav 

106672-9460  

106672-9465 
 
3256520220 
INJECTION-PUMP ASSEMBLY
S6A2
106672-9461  

106672-9465 
 
 
INJECTION-PUMP ASSEMBLY
S6A2
106672-9462  

106672-9465 
 
 
INJECTION-PUMP ASSEMBLY
S6A2
106672-9463  

106672-9465 
 
3256520221 
INJECTION-PUMP ASSEMBLY
S6A2
106672-9465  
 
3256530220 
INJECTION-PUMP ASSEMBLY
S6A2
Back to top