1. Home
  2. injection
  3. #1066724271

106672-4271 ZEXEL 9 400 617 119 BOSCH INJECTION-PUMP ASSEMBLY 9400617119 1066724271 1512612222


106672-4271 INJECTION-PUMP ASSEMBLY
Rating:
51
Buy INJECTION-PUMP ASSEMBLY 106672-4271 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 119 9400617119
ZEXEL 106672-4271 1066724271
KUBOTA 1512612222 1512612222

Service parts 106672-4271 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-5660
3. GOVERNOR 105447-0130
4. SUPPLY PUMP 105207-1130
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105663-0080
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105111-3000
11. Nozzle and Holder 151-2705-202
12. Open Pre:MPa(Kqf/cm2) 25.5{260}
13. NOZZLE-HOLDER 105041-6000
14. NOZZLE 105010-1880
15. NOZZLE SET

Include in #1:

106672-4271 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 119 9400617119
ZEXEL 106672-4271 1066724271
KUBOTA 1512612222 1512612222


Zexel num Bosch num Firm num Firm Name
106672-4271  9 400 617 119  1512612222  KUBOTA INJECTION-PUMP ASSEMBLY
L6D15 * K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:



Adjustment conditions Test oil   ISO4113 or {SAEJ967d}
1404 Test oil
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe mm   8-3-600
Outer diameter - inner diameter - length (mm)
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)   L
Left


Injection timing adjustment Direction of rotation (viewed from drive side)   L
Left
Injection order   1-5-3-6- 2-4
Pre-stroke mm   2.05 2 2.1
Beginning of injection position   NO.1
Drive side
Difference between angles 1 deg.   60 59.5 60.5
Cal 1-5
Difference between angles 2 deg.   120 119.5 120.5
Cal 1-3
Difference between angles 3 deg.   180 179.5 180.5
Cal 1-6
Difference between angles 4 deg.   240 239.5 240.5
Cyl.1-2
Difference between angles 5 deg.   300 299.5 300.5
Cal 1-4


Injection quantity adjustment Adjusting point   A
Rack position   12.8
Pump speed r/min   900 900 900
Each cylinder's injection qty mm3/st.   185 182.9 187.1
Basic   *
Fixing the rack   *


Injection quantity adjustment_02 Adjusting point   B
Rack position   11.2+-0. 5
Pump speed r/min   900 900 900
Each cylinder's injection qty mm3/st.   140.5 137.5 143.5
Fixing the rack   *

Test data Ex:



Governor adjustment

Test data 106672-4271 N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Idle sub spring setting: L1.
----------
K=11 L1=8-0.2mm
----------



Speed control lever angle

Test data 106672-4271 F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(11deg)+-5deg b=(34deg)+-5deg



Stop lever angle

Test data 106672-4271 N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=(0deg) b=(53deg)




Have questions with 106672-4271?





Group cross 106672-4271 ZEXEL

106672-4200      INJECTION-PUMP ASSEMBLY

Komatsu 

106672-4201  9 400 613 419  6127711015  INJECTION-PUMP ASSEMBLY
S6D155
106672-4210    6990200110 
106672-4220 
106672-4420    6127711070 
106672-4230    6127711020 
S6D155
106672-4250    6990204210 

Kubota 

106672-4271  9 400 617 119  1512612222  INJECTION-PUMP ASSEMBLY
L6D15
Back to top