106672-3364 ZEXEL 9 400 617 084 BOSCH INJECTION-PUMP ASSEMBLY 9400617084 1066723364 220202795a


106672-3364 INJECTION-PUMP ASSEMBLY
Rating:
49
Buy INJECTION-PUMP ASSEMBLY 106672-3364 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 084 9400617084
ZEXEL 106672-3364 1066723364
HINO 220202795A 220202795a

Service parts 106672-3364 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106060-7421
3. GOVERNOR 105407-4441
4. SUPPLY PUMP 105217-1301
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105662-0850
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-5851
11. Nozzle and Holder 23600-2030A
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105031-5480
14. NOZZLE 105015-7690
15. NOZZLE SET

Include in #1:

106672-3364 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 084 9400617084
ZEXEL 106672-3364 1066723364
HINO 220202795A 220202795a


Zexel num
Bosch num
Firm num
Name
106672-3364 
9 400 617 084 
220202795A  HINO
INJECTION-PUMP ASSEMBLY
EK130-T K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   134424-0920
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.3 3.2 3.3
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.6
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   175.3 173.3 177.3
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   9.1
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   167.8 161.8 173.8
Max. variation between cylinders %   0 -4 4
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   -
Rack position   5.4+-0.5
Pump speed r/min   360 360 360
Average injection quantity mm3/st.   14.8 11.8 17.8
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 

Test data Ex:

Governor adjustment

Test data 106672-3364
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Set idle sub-spring (3)Main spring setting (4)Rack difference between N = N1 and N = N2
----------
K=6 N1=750r/min N2=550r/min
----------

Speed control lever angle

Test data 106672-3364
F:Full speed I:Idle (1)Set the pump speed at aa. ( At delivery ) (2)Set the pump speed at bb. (3)Stopper bolt setting
----------
aa=900r/min bb=750r/min
----------
a=(5deg)+-5deg b=(19deg)+-5deg c=(5deg)+-5deg

Stop lever angle

Test data 106672-3364
N:Pump normal S:Stop the pump. (1)Contacts inner stopper. (2)Rack position = aa or less, at speed = bb (3)Contacts outer stopper.
----------
aa=4.4mm bb=0r/min
----------
a=27deg+-5deg b=53deg+-5deg c=(11deg)

Timing setting

Test data 106672-3364
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(0deg)




Have questions with 106672-3364?





Group cross 106672-3364 ZEXEL

Hino 

 
220202791A 
INJECTION-PUMP ASSEMBLY
EK130T
 
220202792A 
INJECTION-PUMP ASSEMBLY
EK130-T
 
220202793A 
INJECTION-PUMP ASSEMBLY
EK130-T
9 400 617 083 
220202794A 
INJECTION-PUMP ASSEMBLY
EK130-T
106672-3364  
9 400 617 084 
220202795A 
INJECTION-PUMP ASSEMBLY
EK130-T
Back to top