106672-3216 ZEXEL 9 400 617 074 BOSCH INJECTION-PUMP ASSEMBLY 9400617074 1066723216 220004846a


106672-3216 INJECTION-PUMP ASSEMBLY
Rating:
18
Buy INJECTION-PUMP ASSEMBLY 106672-3216 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 074 9400617074
ZEXEL 106672-3216 1066723216
HINO 220004846A 220004846a

Service parts 106672-3216 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106060-7090
3. GOVERNOR 105488-0686
4. SUPPLY PUMP 105217-1430
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105663-0420
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-7261
11. Nozzle and Holder 23600-1741
12. Open Pre:MPa(Kqf/cm2) 16.7{170}/27.5{280}
13. NOZZLE-HOLDER 105031-4890
14. NOZZLE 105015-7590
15. NOZZLE SET

Include in #1:

106672-3216 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 074 9400617074
ZEXEL 106672-3216 1066723216
HINO 220004846A 220004846a


Zexel num
Bosch num
Firm num
Name
106672-3216 
9 400 617 074 
220004846A  HINO
INJECTION-PUMP ASSEMBLY
EP2 K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve (drive side)   134424-1420
Overflow valve opening pressure (drive side) kPa   162 147 177
Overflow valve opening pressure (drive side) kgf/cm2   1.65 1.5 1.8
Overflow valve (governor side)   134424-1720
Overflow valve opening pressure (governor side) kPa   162 147 177
Overflow valve opening pressure (governor side) kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   4.5 4.44 4.5
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.75 60.25
Difference between angles 2
Cyl.1-2
deg.   120 119.75 120.25
Difference between angles 3
Cal 1-6
deg.   180 179.75 180.25
Difference between angles 4
Cal 1-3
deg.   240 239.75 240.25
Difference between angles 5
Cal 1-5
deg.   300 299.75 300.25
Injection quantity adjustment
Adjusting point   A
Rack position   8.8
Pump speed r/min   650 650 650
Average injection quantity mm3/st.   173 171 175
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Boost pressure kPa   53.3 53.3
Boost pressure mmHg   400 400
Injection quantity adjustment_02
Adjusting point   B
Rack position   9.1
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   183.5 180.5 186.5
Max. variation between cylinders %   0 -5 5
Fixing the lever   *
Boost pressure kPa   53.3 53.3
Boost pressure mmHg   400 400
Injection quantity adjustment_03
Adjusting point   C
Rack position   8.8
Pump speed r/min   850 850 850
Average injection quantity mm3/st.   171 165 177
Fixing the lever   *
Boost pressure kPa   53.3 53.3
Boost pressure mmHg   400 400
Injection quantity adjustment_04
Adjusting point   D
Rack position   8.4
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   160.5 157.5 163.5
Max. variation between cylinders %   0 -5 5
Fixing the lever   *
Boost pressure kPa   53.3 53.3
Boost pressure mmHg   400 400
Injection quantity adjustment_05
Adjusting point   E
Rack position   7.4
Pump speed r/min   1150 1150 1150
Average injection quantity mm3/st.   137 132 142
Fixing the lever   *
Boost pressure kPa   53.3 53.3
Boost pressure mmHg   400 400
Injection quantity adjustment_06
Adjusting point   F
Rack position   9.2+0.2
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   186 180 192
Fixing the lever   *
Boost pressure kPa   53.3 53.3
Boost pressure mmHg   400 400
Rack limit   *
Injection quantity adjustment_07
Adjusting point   G
Rack position   6.4
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   86 84 88
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_08
Adjusting point   J
Rack position   4.6+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   11 8 14
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Boost compensator adjustment
Pump speed r/min   650 650 650
Rack position   6.4
Boost pressure kPa   9.3 7.3 9.3
Boost pressure mmHg   70 55 70
Boost compensator adjustment_02
Pump speed r/min   650 650 650
Rack position   8.8
Boost pressure kPa   40 40 40
Boost pressure mmHg   300 300 300

Test data Ex:

Governor adjustment

Test data 106672-3216
N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)RACK LIMIT: RAL (4)Set idle at delivery (5)Damper spring setting: DL
----------
RT=0.8 TH=1.5mm RAL=9.2+0.2mm DL=4.4-0.2mm
----------

Speed control lever angle

Test data 106672-3216
F:Full speed
----------

----------
a=8deg+-5deg

0000000901

Test data 106672-3216
F:Full load I:Idle (1)Set point J (2)At delivery
----------

----------
a=25deg+-5deg b=45deg+-3deg c=47deg+-5deg

Stop lever angle

Test data 106672-3216
N:Pump normal S:Stop the pump.
----------

----------
a=40deg+-5deg b=50deg+-5deg

0000001501 RACK SENSOR

Test data 106672-3216
R:Rack position (mm) V:Voltage (V) After installing the rack sensor, confirm the output value (VR).
----------
N1=650r/min Ra=8.8mm VR=1.7+-0.01V
----------

Timing setting

Test data 106672-3216
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(0deg)




Have questions with 106672-3216?





Group cross 106672-3216 ZEXEL

Hino 

 
220004840A 
INJECTION-PUMP ASSEMBLY
EP2
 
220004841A 
INJECTION-PUMP ASSEMBLY
EP2
 
220004842A 
INJECTION-PUMP ASSEMBLY
EP2
 
220004843A 
INJECTION-PUMP ASSEMBLY
EP2
 
220004844A 
INJECTION-PUMP ASSEMBLY
EP2
 
220004845A 
INJECTION-PUMP ASSEMBLY
EP2
106672-3216  
9 400 617 074 
220004846A 
INJECTION-PUMP ASSEMBLY
EP2
Back to top