106672-3047 ZEXEL F 019 Z10 293 BOSCH INJECTION-PUMP ASSEMBLY f019z10293 1066723047 220004090a

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106672-3047 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z10 293 f019z10293

ZEXEL 106672-3047 1066723047

HINO 220004090A 220004090a

Service parts 106672-3047 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106067-7541

3. GOVERNOR 105488-8170

4. SUPPLY PUMP 105217-1301

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105662-0690

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-5031

11. Nozzle and Holder 23600-1221

12. Open Pre:MPa(Kqf/cm2) 21.6{220}

13. NOZZLE-HOLDER 105031-5300

14. NOZZLE

105015-4640

15. NOZZLE SET

Include in #1:

106672-3047 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 019 Z10 293 f019z10293

ZEXEL 106672-3047 1066723047

HINO 220004090A 220004090a

Zexel num

Bosch num

Firm num

Name

106672-3047

F 019 Z10 293

220004090A HINO

INJECTION-PUMP ASSEMBLY
EK100 * K 14CA PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve opening pressure kPa 162 147 177

Overflow valve opening pressure kgf/cm2 1.65 1.5 1.8

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.3 3.24 3.3

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.75 60.25

Difference between angles 2
Cyl.1-2 deg. 120 119.75 120.25

Difference between angles 3
Cal 1-6 deg. 180 179.75 180.25

Difference between angles 4
Cal 1-3 deg. 240 239.75 240.25

Difference between angles 5
Cal 1-5 deg. 300 299.75 300.25

Injection quantity adjustment

Adjusting point A

Rack position 10.9

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 134.9 131.9 137.9

Max. variation between cylinders % 0 -4 4

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 11.2

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 145.4 143.4 147.4

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the lever *

Injection quantity adjustment_03

Adjusting point C

Rack position 11.6

Pump speed r/min 1150 1150 1150

Average injection quantity mm3/st. 151.7 148.7 154.7

Max. variation between cylinders % 0 -4 4

Fixing the lever *

Injection quantity adjustment_04

Adjusting point D

Rack position 7+-0.5

Pump speed r/min 225 225 225

Average injection quantity mm3/st. 15 12 18

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Injection quantity adjustment_05

Adjusting point E

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 136 126 146

Fixing the lever *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Tolerance for racks not indicated: +-0.05mm. (2)RACK LIMIT (3)Damper spring setting
----------

----------

Speed control lever angle

F:Full speed
----------

----------
a=3deg+-5deg

0000000901

F:Full load I:Idle (1)Set point D (2)At delivery (3)Stopper bolt setting
----------

----------
a=10deg+-5deg b=27deg+-3deg c=27deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=15deg+-5deg b=64deg+-5deg

0000001501 GOVERNOR TORQUE CONTROL

Dr:Torque control stroke (A): Without torque control spring capsule 1. Adjustment procedures (1)Procedure is the same as that for the RFD (former type), except that the positive torque control stroke must be determined at the full lever setting. 2. Procedures for adjustment (1)Remove the torque control spring capsule. (2)Operate the pump at approximately N1. (End of idling spring operation < N1.) (3)Tilt the lever to the full side. (4)Set so that R = RF. (5)Increase the speed by pushing in the screw (attached to the bracket on the rear of the tension lever) through the adjusting window. (6)Adjust so that the torque control stroke Dr1 can be obtained. (7)Align N2 and N3 with the torque control spring capsule. 3. Final confirmation (1)After final confirmation, temporarily set the load lever to N = N1, R = idling position. (2)From this condition, increase speed to N = N4. (3)Confirm that positive torque control stroke is Dr2.
----------
N1=500r/min N2=(550)r/min N3=(900)r/min N4=950r/min RF=10.9mm Dr1=0.5mm Dr2=0+0.3mm
----------