106672-2430 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066722430 me059576


106672-2430 INJECTION-PUMP ASSEMBLY
Rating:
28
Buy INJECTION-PUMP ASSEMBLY 106672-2430 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106672-2430 1066722430
MITSUBISHI ME059576 me059576

Cross reference number

ZEXEL 106672-2430 1066722430
MITSUBISHI ME059576 me059576


Zexel num
Bosch num
Firm num
Name
106672-2430 
 
ME059576  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D22MTK * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.5
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   142.4 139.4 145.4
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.5+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   16 13.4 18.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 106672-2430
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT: RAL (3)Setting at shipping (4)Idle sub spring setting: L1.
----------
K=5 RAL=12.5+0.2mm L1=5.5-0.5mm
----------

Speed control lever angle

Test data 106672-2430
F:Full speed I:Idle S:Stop (1)At shipping
----------

----------
a=30deg+-5deg b=32deg+-3deg c=7deg+-5deg d=(2deg)

Stop lever angle

Test data 106672-2430
N:Pump normal S:Stop the pump.
----------

----------
a=20deg+-5deg b=46deg+-5deg




Have questions with 106672-2430?





Group cross 106672-2430 ZEXEL

Mitsubishi-Heav 

 
3266510090 

S12A

Mitsubishi 

 
ME059544 
INJECTION-PUMP ASSEMBLY
6D22PT

Mitsubishi-Heav 

 
3626500230 
INJECTION-PUMP ASSEMBLY
S6B
 
3626510230 
INJECTION-PUMP ASSEMBLY
S6B
 
3626520230 
INJECTION-PUMP ASSEMBLY
S6B
 
3626520231 
INJECTION-PUMP ASSEMBLY
S6B

Mitsubishi 

106672-2430  
 
ME059576 
INJECTION-PUMP ASSEMBLY
6D22MTK
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 065 
ME056689 
INJECTION-PUMP ASSEMBLY
6D22T7
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 066 
ME056755 
INJECTION-PUMP ASSEMBLY
6D22T7
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 067 
ME056798 
INJECTION-PUMP ASSEMBLY
6D22T7
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 068 
ME120370 
INJECTION-PUMP ASSEMBLY
6D40T1
Back to top