Fuel injectors
  1. Home
  2. injection
  3. #1066722190

106672-2190 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066722190 0429050651


106672-2190 INJECTION-PUMP ASSEMBLY
Rating:
20
Buy INJECTION-PUMP ASSEMBLY 106672-2190 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106672-2190 1066722190
MITSUBISHI-HEAV 0429050651 0429050651

Service parts 106672-2190 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP
3. GOVERNOR 105447-5230
4. SUPPLY PUMP 105217-1331
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105663-0200
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105110-4201
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 29.4{300}
13. NOZZLE-HOLDER 105040-2180
14. NOZZLE 105015-4850
15. NOZZLE SET

Include in #1:

106672-2190 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106672-2190 1066722190
MITSUBISHI-HEAV 0429050651 0429050651


Zexel num
Bosch num
Firm num
Name
106672-2190 
106672-2261 
 
0429050651  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S6A *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle   105015-3640
Bosch type code   DLL165S288NP85
Nozzle holder   105040-2140
Opening pressure MPa   29.4
Opening pressure kgf/cm2   300
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-1130
Overflow valve   131424-1520
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left   L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left   L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.4 3.35 3.45
Beginning of injection position
Governor side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   18
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   330 321 339
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   18
Pump speed r/min   450 450 450
Average injection quantity mm3/st.   338 328 348
Max. variation between cylinders %   0 -5 5
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   8
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   30 27 33
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   5.4
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   30 25 35
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 106672-2190
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Idle sub spring setting: L1.
----------
K=7 L1=5.6-0.5mm
----------

Speed control lever angle

Test data 106672-2190
F:Full speed S:Stop
----------

----------
a=(23deg) b=32deg+-3deg

0000000901

Test data 106672-2190
F:Full load I:Idle S:Stop
----------

----------
a=5deg+-5deg b=31deg+-3deg c=7deg+-3deg




Have questions with 106672-2190?





Group cross 106672-2190 ZEXEL

Mitsubishi-Heav 

106672-2100  

106672-2140 
 
0429050402 

12DE
106672-2110  
 
0429050461 
INJECTION-PUMP ASSEMBLY
12DE
106672-2121  
9 400 617 060 
0429050423 
INJECTION-PUMP ASSEMBLY
12DE
106672-2131  
9 400 617 061 
0429050453 
INJECTION-PUMP ASSEMBLY
12DE
106672-2140  
 
0429050403 

12DE
106672-2180  

106671-2250 
 
0429050681 

S6A

Mitsubishi-Heav 

106672-2190  

106672-2261 
 
0429050651 
INJECTION-PUMP ASSEMBLY
S6A
Back to top