106672-0110 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066720110

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106672-0110 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106672-0110 1066720110

Service parts 106672-0110 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106061-5840

3. GOVERNOR 105952-0640

4. SUPPLY PUMP 105237-1880

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105664-0750

7. COUPLING PLATE 156638-0920

8. _ 159590-0920

9. _

10. NOZZLE AND HOLDER ASSY 105101-6160

11. Nozzle and Holder 16600-96570

12. Open Pre:MPa(Kqf/cm2) 19.6{200}

13. NOZZLE-HOLDER 105031-4370

14. NOZZLE 105015-8430

15. NOZZLE SET

Include in #1:

106672-0110 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106672-0110 1066720110

Zexel num

Bosch num

Firm num

Name

106672-0110

INJECTION-PUMP ASSEMBLY
14CP TICS HD-TI6F TICS

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 134424-4120

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

RED3 control unit part number 407910-2 470

RED3 rack sensor specifications mm 15

PS/ACT control unit part no. 407980-2 24*

Digi switch no. 21

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 5.6 5.57 5.63

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.75 60.25

Difference between angles 2
Cyl.1-2 deg. 120 119.75 120.25

Difference between angles 3
Cal 1-6 deg. 180 179.75 180.25

Difference between angles 4
Cal 1-3 deg. 240 239.75 240.25

Difference between angles 5
Cal 1-5 deg. 300 299.75 300.25

Injection quantity adjustment

Rack position (12.7)

Vist V 1.45 1.45 1.45

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 168.1 166.1 170.1

Max. variation between cylinders % 0 -4 4

Basic *

PS407980-224* V V1+0.1

PS407980-224* mm 5.4+-0.0 3

Remarks
Refer to items regarding the pre-stroke actuator

Injection quantity adjustment_02

Rack position (7.3)

Vist V 2.5 2.4 2.6

Pump speed r/min 225 225 225

Average injection quantity mm3/st. 8 7 9

Max. variation between cylinders % 0 -10 10

PS407980-224* V V1+0.1

PS407980-224* mm 5.4+-0.0 3

0000001201

Pre-stroke mm 5.6 5.57 5.63

Remarks
When the timing sleeve is pushed up

_02

Connector angle deg. 5 4.5 5.5

Remarks
When the eccentric pin is tightened

_03

Supply voltage V 24 23.5 24.5

Ambient temperature degC 23 18 28

Pre-stroke mm 5.6 5.57 5.63

Output voltage V 1.2 1.05 1.35

Adjustment *

Remarks
Output voltage V1

_04

Supply voltage V 24 23.5 24.5

Ambient temperature degC 23 18 28

Pre-stroke mm 2.6 2.32 2.88

Output voltage V 2.7 2.53 2.87

Confirmation *

_05

Supply voltage V 24 23.5 24.5

Ambient temperature degC 23 18 28

Output voltage V 2.85 2.85

Confirmation of operating range *

Test data Ex:

Speed control lever angle

N:Pump normal S:Stop the pump. (1)Rack position = aa (2)Rack position bb
----------
aa=1mm bb=16mm
----------
a=12deg+-5deg b=29deg+-5deg

0000000901

(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)Pre-stroke: aa (4)-
----------
aa=5.6+-0.03mm
----------
a=(30deg)

0000001701

(Rs) rack sensor specifications (C/U) control unit part number (V) Rack sensor output voltage (R) Rack position (mm) 1. Confirming governor output characteristics (rack 15 mm, span 6 mm) (1)When the output voltages of the rack sensor are V1 and V2, check that the rack positions R1 and R2 in the table above are satisfied.
----------

----------