106671-8793 ZEXEL 9 400 610 893 BOSCH INJECTION-PUMP ASSEMBLY 9400610893 1066718793


106671-8793 INJECTION-PUMP ASSEMBLY
Rating:
35
Buy INJECTION-PUMP ASSEMBLY 106671-8793 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 893 9400610893
ZEXEL 106671-8793 1066718793

Service parts 106671-8793 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-0781
3. GOVERNOR 105407-5922
4. SUPPLY PUMP 105217-1930
5. AUTOM. ADVANCE MECHANIS 105681-5470
6. COUPLING PLATE 105663-0540
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-5721
11. Nozzle and Holder 23600-1970B
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-5470
14. NOZZLE 105015-7020
15. NOZZLE SET

Include in #1:

106671-8793 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 893 9400610893
ZEXEL 106671-8793 1066718793


Zexel num
Bosch num
Firm num
Name
106671-8793 
106671-8794 
9 400 610 893 
   
INJECTION-PUMP ASSEMBLY
K13C-T * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   134424-0920
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.9 3.84 3.9
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.75 60.25
Difference between angles 2
Cyl.1-2
deg.   120 119.75 120.25
Difference between angles 3
Cal 1-6
deg.   180 179.75 180.25
Difference between angles 4
Cal 1-3
deg.   240 239.75 240.25
Difference between angles 5
Cal 1-5
deg.   300 299.75 300.25
Injection quantity adjustment
Adjusting point   A
Rack position   11.4
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   204 202 206
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Boost pressure kPa   62 62
Boost pressure mmHg   465 465
Injection quantity adjustment_02
Adjusting point   C
Rack position   5.2+-0.5
Pump speed r/min   550 550 550
Average injection quantity mm3/st.   12 9 15
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_03
Adjusting point   D
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   165 165 175
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   600 600 600
Rack position   R1-1.6
Boost pressure kPa   20.7 18 23.4
Boost pressure mmHg   155 135 175
Boost compensator adjustment_02
Pump speed r/min   600 600 600
Rack position   R1(11.4)
Boost pressure kPa   50 44.7 55.3
Boost pressure mmHg   375 335 415
Timer adjustment
Pump speed r/min   750--
Advance angle deg.   0 0 0
Load   3/4
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   700
Advance angle deg.   0.3
Load   3/4
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   0 0 0
Load   4/4
Remarks
Measure speed (beginning of operation).
 
Timer adjustment_04
Pump speed r/min   1000
Advance angle deg.   3 2.7 3.3
Load   4/4
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106671-8793
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Set idle sub-spring (4)RACK LIMIT (5)Boost compensator stroke: BCL (6)Main spring setting
----------
K=14 BCL=1.6+-0.1mm
----------

Speed control lever angle

Test data 106671-8793
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=7deg+-5deg b=17deg+-5deg

Stop lever angle

Test data 106671-8793
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery) (2)At delivery (3)Stopper bolt setting (4)Rack position corresponding to cc (seal at delivery) (5)Stopper bolt setting
----------
aa=0r/min bb=2.5-0.5mm cc=19.5mm
----------
a=5deg+-5deg b=55deg+-5deg

Timing setting

Test data 106671-8793
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(0deg)




Have questions with 106671-8793?





Group cross 106671-8793 ZEXEL

Hino 

 
220204640A 
INJECTION-PUMP ASSEMBLY
K13C-T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
106671-8793  

106671-8794 
9 400 610 893 
 
INJECTION-PUMP ASSEMBLY
K13C-T

Hino 

9 400 613 232 
220204641A 
INJECTION-PUMP ASSEMBLY
K13C-T
Back to top