106671-7210 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066717210 me056526


106671-7210 INJECTION-PUMP ASSEMBLY
Rating:
17
Buy INJECTION-PUMP ASSEMBLY 106671-7210 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106671-7210 1066717210
MITSUBISHI ME056526 me056526

Cross reference number

ZEXEL 106671-7210 1066717210
MITSUBISHI ME056526 me056526


Zexel num
Bosch num
Firm num
Name
106671-7210 
 
ME056526  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D22TA *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   7.5+-0.5
Pump speed r/min   700 700 700
Each cylinder's injection qty mm3/st.   89.5 87.3 91.7
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   F
Rack position   5+-0.5
Pump speed r/min   500 500 500
Each cylinder's injection qty mm3/st.   16.5 14 19
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(7.5)
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   89.5 88.5 90.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   7.9+-0.5
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   116 112.8 119.2
Difference in delivery mm3/st.   6.4 6.4 6.4
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   C
Rack position   5.7+-0.5
Pump speed r/min   225 225 225
Each cylinder's injection qty mm3/st.   16.5 14 19
Fixing the rack   *
Remarks
(check)
 
Injection quantity adjustment_06
Adjusting point   E
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   133 93 173
Fixing the lever   *
Timer adjustment
Pump speed r/min   450--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   400
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   600
Advance angle deg.   1.5 1 2
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106671-7210
N:Pump speed R:Rack position (mm) (1)Damper spring setting: DL (2)Excess fuel setting for starting: SXL
----------
DL=4.5-0.2mm SXL=(R1+1.4)+-0.1mm
----------

Speed control lever angle

Test data 106671-7210
F:Full speed
----------

----------
a=17.5deg+-5deg

0000000901

Test data 106671-7210
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=(21.5deg)+-3deg b=25deg+-5deg

Stop lever angle

Test data 106671-7210
N:Engine manufacturer's normal use S:Stop the pump. (1)Rack position = aa (2)Stopper bolt setting (3)Rack position bb (4)Free (at shipping)
----------
aa=4.1-0.5mm bb=13.3mm
----------
a=1.5deg+5deg-7deg b=25.5deg+-5deg c=(38deg)

0000001501 MICRO SWITCH

Adjustment of the micro-switch Adjust the bolt to obtain the following lever position when the micro-switch is ON. (1)Speed N1 (2)Rack position Ra
----------
N1=325+-5r/min Ra=5.4mm
----------

Timing setting

Test data 106671-7210
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(7deg)




Have questions with 106671-7210?





Group cross 106671-7210 ZEXEL

Mitsubishi 

 
 
INJECTION-PUMP ASSEMBLY
6D22TA
 
ME056528 
INJECTION-PUMP ASSEMBLY
6D22TA
106671-7210  
 
ME056526 
INJECTION-PUMP ASSEMBLY
6D22TA
 
 
INJECTION-PUMP ASSEMBLY
6D22T3
 
ME056520 
INJECTION-PUMP ASSEMBLY
6D22T3
 
 
INJECTION-PUMP ASSEMBLY
6D22T3
 
ME056525 
INJECTION-PUMP ASSEMBLY
6D22T3
 
 
INJECTION-PUMP ASSEMBLY
6D22T4
 
ME056555 
INJECTION-PUMP ASSEMBLY
6D22T4
 
 
INJECTION-PUMP ASSEMBLY
6D22T4
F 019 Z20 490 
ME056556 
INJECTION-PUMP ASSEMBLY
6D22T4
 
 
INJECTION-PUMP ASSEMBLY
6D22T4
F 019 Z20 491 
ME056557 
INJECTION-PUMP ASSEMBLY
6D22T4
 
 
INJECTION-PUMP ASSEMBLY
6D22T2
9 400 616 930 
ME056560 
INJECTION-PUMP ASSEMBLY
6D22T2
 
 
INJECTION-PUMP ASSEMBLY
6D22T2
 
ME056571 
INJECTION-PUMP ASSEMBLY
6D22T2
 
 
INJECTION-PUMP ASSEMBLY
6D22T2
 
ME056572 
INJECTION-PUMP ASSEMBLY
6D22T2
Back to top