106671-6391 ZEXEL 9 400 612 039 BOSCH INJECTION-PUMP ASSEMBLY 9400612039 1066716391 1156032740


106671-6391 INJECTION-PUMP ASSEMBLY
Rating:
21
Buy INJECTION-PUMP ASSEMBLY 106671-6391 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 612 039 9400612039
ZEXEL 106671-6391 1066716391
ISUZU 1156032740 1156032740

Service parts 106671-6391 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-1540
3. GOVERNOR 105407-7060
4. SUPPLY PUMP 105207-1680
5. AUTOM. ADVANCE MECHANIS 105681-5690
6. COUPLING PLATE 105664-2041
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-4751
11. Nozzle and Holder 1-15300-360-1
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105030-3201
14. NOZZLE 105025-1780
15. NOZZLE SET

Include in #1:

106671-6391 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 612 039 9400612039
ZEXEL 106671-6391 1066716391
ISUZU 1156032740 1156032740


Zexel num
Bosch num
Firm num
Name
106671-6391 
9 400 612 039 
1156032740  ISUZU
INJECTION-PUMP ASSEMBLY
6SD1-T K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   134424-1920
Overflow valve opening pressure kPa   127 107 147
Overflow valve opening pressure kgf/cm2   1.3 1.1 1.5
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.7 3.67 3.73
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.75 60.25
Difference between angles 2
Cal 1-3
deg.   120 119.75 120.25
Difference between angles 3
Cal 1-6
deg.   180 179.75 180.25
Difference between angles 4
Cyl.1-2
deg.   240 239.75 240.25
Difference between angles 5
Cal 1-4
deg.   300 299.75 300.25
Injection quantity adjustment
Adjusting point   A
Rack position   11
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   114.5 112.5 116.5
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   8.8+-0.5
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   14.5 11.3 17.7
Max. variation between cylinders %   0 -13 13
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   E
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   140 130 150
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   1000++
Advance angle deg.   0 0 0
Remarks
Do not advance until starting N = 1000.
 
Timer adjustment_02
Pump speed r/min   -
Advance angle deg.   0.5 0.5 0.5
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106671-6391
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting
----------
K=16
----------

Speed control lever angle

Test data 106671-6391
F:Full speed I:Idle S:Stop (1)Rack position = aa (speed = bb)
----------
aa=1-0.5mm bb=0r/min
----------
a=2deg+-5deg b=27deg+-5deg c=41deg+-3deg

Stop lever angle

Test data 106671-6391
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery)
----------
aa=0r/min bb=1-0.5mm
----------
a=15deg+-5deg b=70deg+-5deg

Timing setting

Test data 106671-6391
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(50deg)




Have questions with 106671-6391?





Group cross 106671-6391 ZEXEL

Isuzu 

 
1156031640 
INJECTION-PUMP ASSEMBLY
6SD1-T
 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

9 400 613 207 
1156031641 
INJECTION-PUMP ASSEMBLY
6SD1-T
 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

9 400 616 902 
1156032500 
INJECTION-PUMP ASSEMBLY
6SD1-T
F 019 Z10 001 
1156032570 
INJECTION-PUMP ASSEMBLY
6SD1-TC
F 019 Z10 002 
1156032571 
INJECTION-PUMP ASSEMBLY
6SD1-TC
F 019 Z10 003 
1156032572 
INJECTION-PUMP ASSEMBLY
6SD1-TC
9 400 616 903 
1156032573 
INJECTION-PUMP ASSEMBLY
6SD1-TC
 
1156032550 
INJECTION-PUMP ASSEMBLY
6SD1-TC
 
1156032551 
INJECTION-PUMP ASSEMBLY
6SD1-TC
9 400 616 904 
1156032552 
INJECTION-PUMP ASSEMBLY
6SD1-TC
9 400 619 996 
1156032580 
INJECTION-PUMP ASSEMBLY
6SD1-TC
 
1156032581 
INJECTION-PUMP ASSEMBLY
6SD1-TC
 
1156032582 
INJECTION-PUMP ASSEMBLY
6SD1-TC
9 400 616 905 
1156032583 
INJECTION-PUMP ASSEMBLY
6SD1-TC
 
1156032560 
INJECTION-PUMP ASSEMBLY
6SD1-TC
 
1156032561 
INJECTION-PUMP ASSEMBLY
6SD1-TC
9 400 616 906 
1156032562 
INJECTION-PUMP ASSEMBLY
6SD1-TC
 
1156032460 
INJECTION-PUMP ASSEMBLY
6SD1-TC
9 400 619 999 
1156032461 
INJECTION-PUMP ASSEMBLY
6SD1-TC
F 019 Z10 008 
1156032462 
INJECTION-PUMP ASSEMBLY
6SD1-TC
9 400 611 530 
1156032463 
INJECTION-PUMP ASSEMBLY
6SD1-TC
 
1156032660 
INJECTION-PUMP ASSEMBLY
6WA1-TCN
F 019 Z10 736 
1156032661 
INJECTION-PUMP ASSEMBLY
6WA1-TCN
9 400 616 907 
1156032662 
INJECTION-PUMP ASSEMBLY
6WA1-TCN
 
1156032700 
INJECTION-PUMP ASSEMBLY
6RB1-T
 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

106671-6391  
9 400 612 039 
1156032740 
INJECTION-PUMP ASSEMBLY
6SD1-T
Back to top