106671-6362 ZEXEL F 019 Z10 008 BOSCH INJECTION-PUMP ASSEMBLY f019z10008 1066716362 1156032462

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106671-6362 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z10 008 f019z10008

ZEXEL 106671-6362 1066716362

ISUZU 1156032462 1156032462

Service parts 106671-6362 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106067-1381

3. GOVERNOR 105923-2690

4. SUPPLY PUMP 105237-4850

5. AUTOM. ADVANCE MECHANIS 105681-5830

6. COUPLING PLATE 105664-2261

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-7980

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 17.7{180}/22.1{225}

13. NOZZLE-HOLDER 105031-4801

14. NOZZLE

105025-0700

15. NOZZLE SET

Include in #1:

106671-6362 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 019 Z10 008 f019z10008

ZEXEL 106671-6362 1066716362

ISUZU 1156032462 1156032462

Zexel num

Bosch num

Firm num

Name

106671-6362
106671-6363

F 019 Z10 008

1156032462 ISUZU

INJECTION-PUMP ASSEMBLY
6SD1-TC * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 131424-8620

Overflow valve opening pressure kPa 206 172 240

Overflow valve opening pressure kgf/cm2 2.1 1.75 2.45

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-5-3-6- 2-4

Pre-stroke mm 4.5 4.47 4.53

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.75 60.25

Difference between angles 2
Cal 1-3 deg. 120 119.75 120.25

Difference between angles 3
Cal 1-6 deg. 180 179.75 180.25

Difference between angles 4
Cyl.1-2 deg. 240 239.75 240.25

Difference between angles 5
Cal 1-4 deg. 300 299.75 300.25

Injection quantity adjustment

Adjusting point -

Rack position 11.3

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 149 147 151

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point H

Rack position 6.4+-0.5

Pump speed r/min 290 290 290

Average injection quantity mm3/st. 10 6.8 13.2

Max. variation between cylinders % 0 -13 13

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(11.3)

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 149 147 151

Basic *

Fixing the lever *

Boost pressure kPa 60 60

Boost pressure mmHg 450 450

Injection quantity adjustment_04

Adjusting point B

Rack position R1+0.65

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 161 155 167

Fixing the lever *

Boost pressure kPa 60 60

Boost pressure mmHg 450 450

Boost compensator adjustment

Pump speed r/min 500 500 500

Rack position R2-1.75

Boost pressure kPa 4 4 6.7

Boost pressure mmHg 30 30 50

Boost compensator adjustment_02

Pump speed r/min 500 500 500

Rack position R2(R1-0. 45)

Boost pressure kPa 46.7 46.7 46.7

Boost pressure mmHg 350 350 350

Timer adjustment

Pump speed r/min 850--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 800

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 875

Advance angle deg. 1 0.5 1.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)Boost compensator stroke: BCL
----------
T1=AE45 BCL=1.75+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Use the pin at R = aa (2)Stopper bolt set position 'H'
----------
aa=35mm
----------
a=27deg+-5deg b=32.5deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Use the pin at R = aa (2)Set the stopper bolt so that speed = bb and rack position = cc. (Confirm non-injection.)
----------
aa=40mm bb=0r/min cc=1.5+-0.3mm
----------
a=22deg+-5deg b=41deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14deg
----------
a=(40deg)