106671-6061 ZEXEL 9 400 610 873 BOSCH INJECTION-PUMP ASSEMBLY 9400610873 1066716061 1156029801


106671-6061 INJECTION-PUMP ASSEMBLY
Rating:
22
Buy INJECTION-PUMP ASSEMBLY 106671-6061 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 873 9400610873
ZEXEL 106671-6061 1066716061
ISUZU 1156029801 1156029801

Service parts 106671-6061 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-0990
3. GOVERNOR 105407-6091
4. SUPPLY PUMP 105207-1670
5. AUTOM. ADVANCE MECHANIS 105636-2610
6. COUPLING PLATE 105663-0290
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-6991
11. Nozzle and Holder 1-15300-159-1
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105030-4271
14. NOZZLE 105015-6660
15. NOZZLE SET

Include in #1:

106671-6061 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 873 9400610873
ZEXEL 106671-6061 1066716061
ISUZU 1156029801 1156029801


Zexel num
Bosch num
Firm num
Name
106671-6061 
9 400 610 873 
1156029801  ISUZU
INJECTION-PUMP ASSEMBLY
6RB1-T K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   134424-1920
Overflow valve opening pressure kPa   127 127 127
Overflow valve opening pressure kgf/cm2   1.3 1.3 1.3
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.8 3.77 3.83
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.75 60.25
Difference between angles 2
Cyl.1-2
deg.   120 119.75 120.25
Difference between angles 3
Cal 1-6
deg.   180 179.75 180.25
Difference between angles 4
Cal 1-3
deg.   240 239.75 240.25
Difference between angles 5
Cal 1-5
deg.   300 299.75 300.25
Injection quantity adjustment
Adjusting point   A
Rack position   9.8
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   177 175 179
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Boost pressure kPa   90.6 90.6
Boost pressure mmHg   680 680
Injection quantity adjustment_02
Adjusting point   -
Rack position   6.4+-0.5
Pump speed r/min   385 385 385
Average injection quantity mm3/st.   13.2 10 16.4
Max. variation between cylinders %   0 -13 13
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   D
Rack position   -
Pump speed r/min   150 150 150
Average injection quantity mm3/st.   230 230
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   500 500 500
Rack position   R1-0.8
Boost pressure kPa   50.7 46.7 54.7
Boost pressure mmHg   380 350 410
Boost compensator adjustment_02
Pump speed r/min   500 500 500
Rack position   R1(9.8)
Boost pressure kPa   77.3 70.6 84
Boost pressure mmHg   580 530 630
Timer adjustment
Pump speed r/min   1150++
Advance angle deg.   0 0 0
Remarks
Do not advance until starting N = 1150.
 
Timer adjustment_02
Pump speed r/min   1150
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   1 0.5 1.5
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106671-6061
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting (6)Boost compensator stroke: BCL
----------
K=10 BCL=0.8+-0.1mm
----------

Speed control lever angle

Test data 106671-6061
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=2deg+-5deg b=20deg+-5deg

Stop lever angle

Test data 106671-6061
N:Pump normal S:Stop the pump. (1)Rack position = aa, speed = bb (stamp at delivery)
----------
aa=1-0.5mm bb=0r/min
----------
a=53deg+-5deg b=70deg+-5deg

0000001501 TAMPER PROOF

Test data 106671-6061
Tamperproofing-equipped boost compensator cover installation procedure (A) After adjusting the boost compensator, tighten the bolts to remove the heads. (1)Before adjusting the governor and the boost compensator, tighten the screw to the specified torque. (Tightening torque T = T1 maximum) (2)After adjusting the governor and the boost compensator, tighten to the specified torque to break off the bolt heads. (Tightening torque T = T2 maximum)
----------
T1=2.5N-m(0.25kgf-m) T2=2.9~4.4N-m(0.3~0.45kgf-m)
----------

Timing setting

Test data 106671-6061
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14deg
----------
a=(70deg)




Have questions with 106671-6061?





Group cross 106671-6061 ZEXEL

Isuzu 

 
1156029780 
INJECTION-PUMP ASSEMBLY
6SD1-TC
 
1156030670 
INJECTION-PUMP ASSEMBLY
6WA1-TC
 
1156030671 
INJECTION-PUMP ASSEMBLY
6WA1-TC
 
1156030672 
INJECTION-PUMP ASSEMBLY
6WA1-TC
 
1156030680 
INJECTION-PUMP ASSEMBLY
6WA1-TC
 
1156030681 
INJECTION-PUMP ASSEMBLY
6WA1-TC
 
1156030682 
INJECTION-PUMP ASSEMBLY
6WA1-TC
 
1156030683 
INJECTION-PUMP ASSEMBLY
6WA1-TC
 
1156030684 
INJECTION-PUMP ASSEMBLY
6WA1-TC
9 400 610 869 
1156030685 
INJECTION-PUMP ASSEMBLY
6WA1-TC
F 019 Z10 123 
1156030686 
INJECTION-PUMP ASSEMBLY
6WA1-TC
9 400 616 895 
1156030687 
INJECTION-PUMP ASSEMBLY
6WA1-TC
 
1156030500 
INJECTION-PUMP ASSEMBLY
6SD1-TCE
 
1156030502 
INJECTION-PUMP ASSEMBLY
6SD1-TCE
9 400 610 870 
1156030504 
INJECTION-PUMP ASSEMBLY
6SD1-TCE
 
1156030510 
INJECTION-PUMP ASSEMBLY
6SD1-TCE
 
1156030512 
INJECTION-PUMP ASSEMBLY
6SD1-TCE
9 400 610 871 
1156030513 
INJECTION-PUMP ASSEMBLY
6SD1-TCE
 
1156030370 
INJECTION-PUMP ASSEMBLY
6HE1-TMC
 
1156030371 
INJECTION-PUMP ASSEMBLY
6HE1-TMC
9 400 610 872 
1156030372 
INJECTION-PUMP ASSEMBLY
6HE1-TMC
 
1156029800 
INJECTION-PUMP ASSEMBLY
6RB1-T
106671-6061  
9 400 610 873 
1156029801 
INJECTION-PUMP ASSEMBLY
6RB1-T
 
1156029751 
INJECTION-PUMP ASSEMBLY
6SD1-T
 
1156029752 
INJECTION-PUMP ASSEMBLY
6SD1-T
9 400 611 452 
1156032630 
INJECTION-PUMP ASSEMBLY
6SD1-T
9 400 610 874 
1156031121 
INJECTION-PUMP ASSEMBLY
6SD1-TCE
F 019 Z10 124 
1156031160 
INJECTION-PUMP ASSEMBLY
6SD1-TCE
Back to top