106671-5371 ZEXEL 9 400 610 852 BOSCH INJECTION-PUMP ASSEMBLY 9400610852 1066715371 1671396961

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106671-5371 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 852 9400610852

ZEXEL 106671-5371 1066715371

NISSAN-DIESEL 1671396961 1671396961

Service parts 106671-5371 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106061-7241

3. GOVERNOR 105489-5090

4. SUPPLY PUMP 105237-4210

5. AUTOM. ADVANCE MECHANIS 105681-1270

6. COUPLING PLATE 105663-0640

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-6930

11. Nozzle and Holder 16600-96603

12. Open Pre:MPa(Kqf/cm2) 22.6{230}

13. NOZZLE-HOLDER 105030-4540

14. NOZZLE 105015-9510

15. NOZZLE SET

Include in #1:

106671-5371 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 852 9400610852

ZEXEL 106671-5371 1066715371

NISSAN-DIESEL 1671396961 1671396961

Zexel num

Bosch num

Firm num

Name

106671-5371

9 400 610 852

1671396961 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
PF6TB * K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 132424-0620

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.9 3.85 3.95

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 12.5

Pump speed r/min 1050 1050 1050

Average injection quantity mm3/st. 199 197 201

Max. variation between cylinders % 0 -4 4

Basic *

Fixing the lever *

Boost pressure kPa 74.6 74.6

Boost pressure mmHg 560 560

Injection quantity adjustment_02

Adjusting point C

Rack position 6.4+-0.5

Pump speed r/min 260 260 260

Average injection quantity mm3/st. 13.5 12.2 14.8

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_03

Adjusting point D

Rack position R1(8.9)

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 95 92 98

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 400 400 400

Rack position R1(8.9)

Boost pressure kPa 13.3 12 14.6

Boost pressure mmHg 100 90 110

Boost compensator adjustment_02

Pump speed r/min 400 400 400

Rack position R1+2.6

Boost pressure kPa 45.3 38.6 52

Boost pressure mmHg 340 290 390

Boost compensator adjustment_03

Pump speed r/min 400 400 400

Rack position 12.7+0.2

Boost pressure kPa 61.3 61.3 61.3

Boost pressure mmHg 460 460 460

Timer adjustment

Pump speed r/min 750--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 700

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1050

Advance angle deg. 1 0.5 1.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Tolerance for racks not indicated: +-0.05mm. (4)Rack limit using the stop lever: R1 (5)Boost compensator stroke: BCL (6)Damper spring setting (7)Variable speed specification: idling adjustment (8)Fix the lever at the full-load position at delivery. (9)Main spring setting (10)Perform governor adjustment at an ambient temperature of at least 15 deg C (boost compensator start spring is shape memory alloy).
----------
RT=1 TH=3mm R1=12.7+0.2mm BCL=(3.9)mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Pump speed = aa (2)Set the stopper bolt (fixed at full-load position at delivery.)
----------
aa=290r/min
----------
a=16deg+-5deg b=5deg+-5deg