106671-4800 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066714800 3626560180

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106671-4800 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106671-4800 1066714800

MITSUBISHI-HEAV 3626560180 3626560180

Service parts 106671-4800 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106061-5681

3. GOVERNOR 105447-0930

4. SUPPLY PUMP 105207-1370

5. AUTOM. ADVANCE MECHANIS 105681-0660

6. COUPLING PLATE 105662-0710

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-5481

11. Nozzle and Holder 36261-33010

12. Open Pre:MPa(Kqf/cm2) 21.6{220}

13. NOZZLE-HOLDER 105030-4051

14. NOZZLE 105015-7160

15. NOZZLE SET

Include in #1:

106671-4800 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106671-4800 1066714800

MITSUBISHI-HEAV 3626560180 3626560180

Zexel num

Bosch num

Firm num

Name

106671-4800
106671-4801

3626560180 MITSUBISHI-HEAV

INJECTION-PUMP ASSEMBLY
S6B * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8130

Bosch type code EFEP215A

Nozzle 105780-0050

Bosch type code DN6TD119NP1T

Nozzle holder 105780-2090

Bosch type code EFEP215

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 131424-7420

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.9 3.85 3.95

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 15.6

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 333 326 340

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the rack *

Injection quantity adjustment_02

Adjusting point B

Rack position 4.7+-0.5

Pump speed r/min 425 425 425

Average injection quantity mm3/st. 32.2 29.7 34.7

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Injection quantity adjustment_03

Adjusting point C

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 325 325 335

Fixing the lever *

Rack limit *

Timer adjustment

Pump speed r/min 450--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 400

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 850

Advance angle deg. 2 1.5 2.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Rack difference between N = N1 and N = N2 (5)Idle sub spring setting: L1.
----------
K=4 N1=900r/min N2=850r/min L1=4.3-0.5mm
----------

Speed control lever angle

F:Full speed S:Stop (1)Set the pump speed at aa. ( At delivery ) (2)Set the pump speed at bb.
----------
aa=900r/min bb=750r/min
----------
a=6deg+-5deg b=29deg+-3deg c=6deg+-5deg