106671-4500 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066714500 3256560160


106671-4500 INJECTION-PUMP ASSEMBLY
Rating:
64
Buy INJECTION-PUMP ASSEMBLY 106671-4500 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106671-4500 1066714500
MITSUBISHI-HEAV 3256560160 3256560160

Service parts 106671-4500 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106060-5361
3. GOVERNOR
4. SUPPLY PUMP 105207-1320
5. AUTOM. ADVANCE MECHANIS 105639-2160
6. COUPLING PLATE 105664-0420
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-5371
11. Nozzle and Holder 32561-66050
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-4761
14. NOZZLE 105015-7010
15. NOZZLE SET

Include in #1:

106671-4500 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106671-4500 1066714500
MITSUBISHI-HEAV 3256560160 3256560160


Zexel num
Bosch num
Firm num
Name
106671-4500 
106671-4504 
 
3256560160  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S6A2 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8130
Bosch type code   EFEP215A
Nozzle   105780-0050
Bosch type code   DN6TD119NP1T
Nozzle holder   105780-2090
Bosch type code   EFEP215
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.9 3.85 3.95
Rack position
Point A
  R=A
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   15.8
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   454.6 445.6 463.6
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.4+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   27.2 24.2 30.2
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Timer adjustment
Pump speed r/min   450--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   400
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   700
Advance angle deg.   4 3.5 4.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106671-4500
N:Pump speed R:Rack position (mm) (1)Target notch: K
----------
K=16
----------

Speed control lever angle

Test data 106671-4500
F:Full speed I:Idle S:Stop
----------

----------
a=36deg+-5deg b=15deg+-5deg c=32deg+-3deg

Stop lever angle

Test data 106671-4500
N:Pump normal S:Stop the pump.
----------

----------
a=21.5deg+-5deg b=75deg+-5deg

Timing setting

Test data 106671-4500
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(20deg)




Have questions with 106671-4500?





Group cross 106671-4500 ZEXEL

Mitsubishi-Heav 

106671-4500  

106671-4504 
 
3256560160 
INJECTION-PUMP ASSEMBLY
S6A2
 
3256560161 
INJECTION-PUMP ASSEMBLY
S6A2
 
3256570160 
INJECTION-PUMP ASSEMBLY
S6A2
 
3256580160 
INJECTION-PUMP ASSEMBLY
S6A2
9 400 616 809 
3256590160 
INJECTION-PUMP ASSEMBLY
S6A2
Back to top