106671-2750 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066712750 me059598


106671-2750 INJECTION-PUMP ASSEMBLY
Rating:
9
Buy INJECTION-PUMP ASSEMBLY 106671-2750 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106671-2750 1066712750
MITSUBISHI ME059598 me059598

Service parts 106671-2750 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-5621
3. GOVERNOR 105487-1440
4. SUPPLY PUMP 105207-1210
5. AUTOM. ADVANCE MECHANIS 105636-1000
6. COUPLING PLATE 105662-0710
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-4770
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 21.6(220)
13. NOZZLE-HOLDER
14. NOZZLE 105015-4380
15. NOZZLE SET

Include in #1:

106671-2750 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106671-2750 1066712750
MITSUBISHI ME059598 me059598


Zexel num
Bosch num
Firm num
Name
106671-2750 
106671-2910 
 
ME059598  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D22WT * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   8
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   107 101 113
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.7+-0.5
Pump speed r/min   200 200 200
Average injection quantity mm3/st.   16.5 14 19
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Timer adjustment
Pump speed r/min   950--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   900
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1000
Advance angle deg.   1 0.5 1.5
Timer adjustment_04
Pump speed r/min   -
Advance angle deg.   2 1.5 2.5
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106671-2750
N:Pump speed R:Rack position (mm) (1)Beginning of damper spring operation: DL (2)Excess fuel setting for starting: SXL
----------
DL=4.5-0.2mm SXL=8+0.2mm
----------

Speed control lever angle

Test data 106671-2750
F:Full speed
----------

----------
a=(2.5deg)+-5deg

0000000901

Test data 106671-2750
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=21.5deg+-5deg b=25deg+-3deg

Stop lever angle

Test data 106671-2750
N:Pump normal S:Stop the pump.
----------

----------
a=25deg+-5deg b=64deg+-5deg




Have questions with 106671-2750?





Group cross 106671-2750 ZEXEL

Mitsubishi 

 
ME056325 
INJECTION-PUMP ASSEMBLY
6D22
 
ME059586 
INJECTION-PUMP ASSEMBLY
6D22CT
 
ME059580 
INJECTION-PUMP ASSEMBLY
6D22PT
9 400 616 758 
ME059587 
INJECTION-PUMP ASSEMBLY
6D22CT

Mitsubishi-Heav 

 
3256510180 
INJECTION-PUMP ASSEMBLY
S6A
 
3256520180 
INJECTION-PUMP ASSEMBLY
S6A
 
 
INJECTION-PUMP ASSEMBLY
S6A
9 400 613 335 
3256520181 
INJECTION-PUMP ASSEMBLY
S6A

Mitsubishi 

106671-2750  

106671-2910 
 
ME059598 
INJECTION-PUMP ASSEMBLY
6D22WT
 
ME056375 
INJECTION-PUMP ASSEMBLY
6D23
 
ME056376 
INJECTION-PUMP ASSEMBLY
6D23
 
 
INJECTION-PUMP ASSEMBLY
6D22T4
 
ME056405 
INJECTION-PUMP ASSEMBLY
6D22T4
Back to top