106671-2480 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066712480 3626500150


106671-2480 INJECTION-PUMP ASSEMBLY
Rating:
48
Buy INJECTION-PUMP ASSEMBLY 106671-2480 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106671-2480 1066712480
MITSUBISHI-HEAV 3626500150 3626500150

Cross reference number

ZEXEL 106671-2480 1066712480
MITSUBISHI-HEAV 3626500150 3626500150


Zexel num
Bosch num
Firm num
Name
106671-2480 
106671-4740 
 
3626500150  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S6B *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.7 3.65 3.75
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.2
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   183.5 176.5 190.5
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   3.6+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   12.3 10.8 13.8
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   224 224 234
Fixing the lever   *
Timer adjustment
Pump speed r/min   400
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   500
Advance angle deg.   0.9
Timer adjustment_03
Pump speed r/min   700
Advance angle deg.   1.2 0.7 1.7
Timer adjustment_04
Pump speed r/min   -
Advance angle deg.   4 4 4
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106671-2480
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT (3)Idle sub spring setting: L1.
----------
K=15 L1=2.9-0.5mm
----------

Speed control lever angle

Test data 106671-2480
F:Full speed S:Stop
----------

----------
a=9deg+-5deg b=32deg+-3deg

0000000901

Test data 106671-2480
F:Full load I:Idle S:Stop
----------

----------
a=1deg+-5deg b=24deg+-3deg c=23deg+-3deg




Have questions with 106671-2480?





Group cross 106671-2480 ZEXEL

Mitsubishi-Heav 

106671-2480  

106671-4740 
 
3626500150 
INJECTION-PUMP ASSEMBLY
S6B
 
3626510150 
INJECTION-PUMP ASSEMBLY
S6B
 
3626520150 
INJECTION-PUMP ASSEMBLY
S6B
 
3626520151 
INJECTION-PUMP ASSEMBLY
S6B
 
3626520152 
INJECTION-PUMP ASSEMBLY
S6B
9 400 616 752 
3626520153 
INJECTION-PUMP ASSEMBLY
S6B
Back to top