106671-0596 ZEXEL 9 400 613 475 BOSCH INJECTION-PUMP ASSEMBLY 9400613475 1066710596 1671396774

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106671-0596 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 613 475 9400613475

ZEXEL 106671-0596 1066710596

NISSAN-DIESEL 1671396774 1671396774

Service parts 106671-0596 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106067-0690

3. GOVERNOR 105487-3621

4. SUPPLY PUMP 105217-1850

5. AUTOM. ADVANCE MECHANIS 105681-2860

6. COUPLING PLATE 105662-1200

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-5600

11. Nozzle and Holder 1660096520

12. Open Pre:MPa(Kqf/cm2) 22.6{230}

13. NOZZLE-HOLDER 105031-4370

14. NOZZLE

105015-6340

15. NOZZLE SET

Include in #1:

106671-0596 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 613 475 9400613475

ZEXEL 106671-0596 1066710596

NISSAN-DIESEL 1671396774 1671396774

Zexel num

Bosch num

Firm num

Name

106671-0596

9 400 613 475

1671396774 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
PE6T K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 132424-0620

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.65 3.6 3.7

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 11.6

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 154.8 152.8 156.8

Max. variation between cylinders % 0 -4 4

Basic *

Fixing the lever *

Boost pressure kPa 29.3 29.3

Boost pressure mmHg 220 220

Injection quantity adjustment_02

Adjusting point C

Rack position 10.4

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 117.4 115.4 119.4

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_03

Adjusting point E

Rack position 8.1+-0.5

Pump speed r/min 250 250 250

Average injection quantity mm3/st. 15 14 16

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 300 300 300

Rack position 10.4

Boost pressure kPa 4 2.7 5.3

Boost pressure mmHg 30 20 40

Boost compensator adjustment_02

Pump speed r/min 300 300 300

Rack position 12.3+0.2

Boost pressure kPa 16 16 16

Boost pressure mmHg 120 120 120

Timer adjustment

Pump speed r/min 1150++

Advance angle deg. 0 0 0

Remarks
Do not advance until starting N = 1150.

Timer adjustment_02

Pump speed r/min -

Advance angle deg. 2 2 2

Remarks
Measure the actual speed, stop

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Maximum - minimum speed specification (using speed lever at adjustment) (2)Lever ratio: RT (3)Target shim dimension: TH (4)Tolerance for racks not indicated: +-0.05mm. (5)Perform governor adjustment at an ambient temperature of at least 15 deg C (boost compensator start spring is shape memory alloy). (6)Rack limit using the stop lever: R1 (7)Boost compensator stroke: BCL (8)Damper spring setting (9)Variable speed specification: idling adjustment (10)Main spring setting (11)Set idle sub-spring
----------
RT=1 TH=1.9mm R1=12.3+0.2mm BCL=2+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Base lever only (2)Set the pump speed at aa (3)Stopper bolt setting (4)Stopper bolt setting
----------
aa=275r/min
----------
a=23deg+-5deg b=17deg+-5deg

0000000901

F:Full load I:Idle (1)Base lever only (2)At threaded hole above R = aa (3)Stopper bolt setting
----------
aa=31mm
----------
a=15deg+-5deg b=24.5deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Drive side (2)Use the hole at R = aa (3)Rack position = bb (set the stopper bolt at point D).
----------
aa=50mm bb=12.3+0.2mm
----------
a=30deg+-5deg b=32deg+-5deg