Fuel injectors
  1. Home
  2. injection
  3. #1066642010

106664-2010 ZEXEL F 019 Z10 025 BOSCH INJECTION-PUMP ASSEMBLY f019z10025 1066642010 0429040502


106664-2010 INJECTION-PUMP ASSEMBLY
Rating:
50
Buy INJECTION-PUMP ASSEMBLY 106664-2010 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z10 025 f019z10025
ZEXEL 106664-2010 1066642010
MITSUBISHI-HEAV 0429040502 0429040502

Service parts 106664-2010 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106066-5061
3. GOVERNOR
4. SUPPLY PUMP 105217-1121
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105151-1390
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 11.8{120}
13. NOZZLE-HOLDER 105081-2150
14. NOZZLE 105000-1130
15. NOZZLE SET

Include in #1:

106664-2010 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 019 Z10 025 f019z10025
ZEXEL 106664-2010 1066642010
MITSUBISHI-HEAV 0429040502 0429040502


Zexel num
Bosch num
Firm num
Name
106664-2010 
F 019 Z10 025 
0429040502  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
12DH * K 14CA PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle   105780-0020
Bosch type code   DN4SD24T
Nozzle holder   105031-2010
Bosch type code   KB56SD273
Opening pressure MPa   11.8
Opening pressure kgf/cm2   120
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left   L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left   L
Injection order   6-2-4-1- 5-3
Pre-stroke mm   2.05 2 2.1
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 6-2 deg.   60 59.5 60.5
Difference between angles 2
Cal 6-4 deg.   120 119.5 120.5
Difference between angles 3
Cal 6-1 deg.   180 179.5 180.5
Difference between angles 4
Cal 6-5 deg.   240 239.5 240.5
Difference between angles 5
Cal 6-3 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   17
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   280 272 288
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the rack   *
Remarks
Standard point A's rack position same as row B's  
Injection quantity adjustment_02
Adjusting point   B
Rack position   17
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   283 269 297
Max. variation between cylinders %   0 -5 5
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   7+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   35 31.5 38.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *




Have questions with 106664-2010?





Group cross 106664-2010 ZEXEL

106664-2000  

106664-2010 
 
0429040500 

12DH

Mitsubishi-Heav 

106664-2010  
F 019 Z10 025 
0429040502 
INJECTION-PUMP ASSEMBLY
12DH
Back to top