Fuel injectors
  1. Home
  2. injection
  3. #1066624160

106662-4160 ZEXEL 9 400 616 643 BOSCH INJECTION-PUMP ASSEMBLY 9400616643 1066624160 m121610140a


106662-4160 INJECTION-PUMP ASSEMBLY
Rating:
29
Buy INJECTION-PUMP ASSEMBLY 106662-4160 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 643 9400616643
ZEXEL 106662-4160 1066624160
DAIHATSU M121610140A m121610140a

Cross reference number

BOSCH 9 400 616 643 9400616643
ZEXEL 106662-4160 1066624160
DAIHATSU M121610140A m121610140a


Zexel num
Bosch num
Firm num
Name
106662-4160 
9 400 616 643 
M121610140A  DAIHATSU
INJECTION-PUMP ASSEMBLY
M2 K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8130
Bosch type code   EFEP215A
Nozzle   105780-0050
Bosch type code   DN6TD119NP1T
Nozzle holder   105780-2090
Bosch type code   EFEP215
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve   131424-1520
Overflow valve opening pressure kPa   157 157 157
Overflow valve opening pressure kgf/cm2   1.6 1.6 1.6
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   2.05 2 2.1
Beginning of injection position
Governor side   NO.1
Difference between angles 1
Cal 1-4 deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.8
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   175 170.2 179.8
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.5+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   25 22.5 27.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 106662-4160
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Delivered with idle spring not operating. (3)RACK LIMIT: RAL (4)Idle sub spring setting: L1.
----------
K=9 RAL=14+-0.5mm L1=4.1-0.5mm
----------

Speed control lever angle

Test data 106662-4160
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=3deg+-5deg b=21.5deg+-5deg

Stop lever angle

Test data 106662-4160
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=(11deg) b=(53deg)




Have questions with 106662-4160?





Group cross 106662-4160 ZEXEL

Daihatsu 

106662-4100  
9 400 616 639 
M120200030Z 
INJECTION-PUMP ASSEMBLY
M2
106662-4110  
9 400 616 640 
A520800110Z 
INJECTION-PUMP ASSEMBLY
M2

Yanmar 

106662-4120  

106662-4123 
 
 
INJECTION-PUMP ASSEMBLY
6HAL
106662-4122  

106662-4123 
 
12665251050 
INJECTION-PUMP ASSEMBLY
6HAL
106662-4123  
 
 
INJECTION-PUMP ASSEMBLY
6HAL
106662-4130  

106662-4131 
9 400 616 641 
 
INJECTION-PUMP ASSEMBLY
6HAL
106662-4131  

106662-4133 
 
 
INJECTION-PUMP ASSEMBLY
6HAL
106662-4132  
 
 
INJECTION-PUMP ASSEMBLY

Yanmar 

106662-4133  
 
12665251060 
INJECTION-PUMP ASSEMBLY
6HAL

Daihatsu 

106662-4140  
9 400 610 353 
M121610050A 
INJECTION-PUMP ASSEMBLY
M2
106662-4150  
9 400 616 642 
M121610110A 
INJECTION-PUMP ASSEMBLY
M2
106662-4160  
9 400 616 643 
M121610140A 
INJECTION-PUMP ASSEMBLY
M2
106662-4170  
9 400 616 644 
M121610170A 
INJECTION-PUMP ASSEMBLY
M2
106662-4180  
9 400 616 645 
M121610200A 
INJECTION-PUMP ASSEMBLY
M2
106662-4190  
 
 
INJECTION-PUMP ASSEMBLY
M2
Back to top