106662-4140 ZEXEL 9 400 610 353 BOSCH INJECTION-PUMP ASSEMBLY 9400610353 1066624140 m121610050a


106662-4140 INJECTION-PUMP ASSEMBLY
Rating:
27
Buy INJECTION-PUMP ASSEMBLY 106662-4140 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 353 9400610353
ZEXEL 106662-4140 1066624140
DAIHATSU M121610050A m121610050a

Service parts 106662-4140 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106066-5180
3. GOVERNOR 105407-1720
4. SUPPLY PUMP 105217-1401
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105663-0240
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105130-1080
11. Nozzle and Holder M126410160ZZ
12. Open Pre:MPa(Kqf/cm2) 14.7{150}
13. NOZZLE-HOLDER 105060-1090
14. NOZZLE 105000-1160
15. NOZZLE SET

Include in #1:

106662-4140 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 353 9400610353
ZEXEL 106662-4140 1066624140
DAIHATSU M121610050A m121610050a


Zexel num
Bosch num
Firm num
Name
106662-4140 
9 400 610 353 
M121610050A  DAIHATSU
INJECTION-PUMP ASSEMBLY
M2 K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8130
Bosch type code   EFEP215A
Nozzle   105780-0050
Bosch type code   DN6TD119NP1T
Nozzle holder   105780-2090
Bosch type code   EFEP215
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-1520
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   2.05 2 2.1
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   126 122.2 129.8
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.5+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   25 22.5 27.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   220 210 230
Fixing the lever   *
Rack limit   *

Test data Ex:

Governor adjustment

Test data 106662-4140
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Delivered with idle spring not operating. (4)RACK LIMIT (5)Set idle sub-spring
----------
K=6
----------

Speed control lever angle

Test data 106662-4140
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=15deg+-5deg b=11deg+-5deg

Stop lever angle

Test data 106662-4140
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=11deg+-5deg b=53deg+-5deg




Have questions with 106662-4140?





Group cross 106662-4140 ZEXEL

Daihatsu 

9 400 616 639 
M120200030Z 
INJECTION-PUMP ASSEMBLY
M2
9 400 616 640 
A520800110Z 
INJECTION-PUMP ASSEMBLY
M2

Yanmar 

 
 
INJECTION-PUMP ASSEMBLY
6HAL
 
12665251050 
INJECTION-PUMP ASSEMBLY
6HAL
 
 
INJECTION-PUMP ASSEMBLY
6HAL
9 400 616 641 
 
INJECTION-PUMP ASSEMBLY
6HAL
 
 
INJECTION-PUMP ASSEMBLY
6HAL
 
 
INJECTION-PUMP ASSEMBLY

Yanmar 

 
12665251060 
INJECTION-PUMP ASSEMBLY
6HAL

Daihatsu 

106662-4140  
9 400 610 353 
M121610050A 
INJECTION-PUMP ASSEMBLY
M2
9 400 616 642 
M121610110A 
INJECTION-PUMP ASSEMBLY
M2
9 400 616 643 
M121610140A 
INJECTION-PUMP ASSEMBLY
M2
9 400 616 644 
M121610170A 
INJECTION-PUMP ASSEMBLY
M2
9 400 616 645 
M121610200A 
INJECTION-PUMP ASSEMBLY
M2
 
 
INJECTION-PUMP ASSEMBLY
M2
Back to top