106661-5060 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066615060

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106661-5060 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106661-5060 1066615060

Service parts 106661-5060 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106066-5260

3. GOVERNOR 105489-1490

4. SUPPLY PUMP 105217-6010

5. AUTOM. ADVANCE MECHANIS 105681-4041

6. COUPLING PLATE 105662-0751

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-5950

11. Nozzle and Holder 16600-96510

12. Open Pre:MPa(Kqf/cm2) 19.6{200}

13. NOZZLE-HOLDER 105031-4370

14. NOZZLE 105015-5580

15. NOZZLE SET

Include in #1:

106661-5060 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106661-5060 1066615060

Zexel num

Bosch num

Firm num

Name

106661-5060

INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.65 3.6 3.7

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 12.2

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 122.3 120.3 124.3

Max. variation between cylinders % 0 -4 4

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 12

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 102.2 99.2 105.2

Max. variation between cylinders % 0 -4 4

Fixing the lever *

Injection quantity adjustment_03

Adjusting point C

Rack position 7+-0.5

Pump speed r/min 240 240 240

Average injection quantity mm3/st. 10 8.7 11.3

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.

Injection quantity adjustment_04

Adjusting point E

Rack position 6.8+-0.5

Pump speed r/min 275 275 275

Average injection quantity mm3/st. 8 6 10

Fixing the lever *

Timer adjustment

Pump speed r/min 200+100

Advance angle deg. 1.6 1.1 2.1

Remarks
Start

Timer adjustment_02

Pump speed r/min 500-150

Advance angle deg. 0 0 0

Timer adjustment_03

Pump speed r/min 925+-30

Advance angle deg. 0 0 0

Timer adjustment_04

Pump speed r/min 1100

Advance angle deg. 3 2.5 3.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Beginning of damper spring operation: DL (2)Rack limit using the stop lever: R1 (3)Excess fuel setting for starting: SXL (4)Variable speed specification.
----------
DL=5.5-0.5mm R1=14+-0.1mm SXL=12.2+0.2mm
----------