106661-0926 ZEXEL 9 400 616 586 BOSCH INJECTION-PUMP ASSEMBLY 9400616586 1066610926 1671396607


106661-0926 INJECTION-PUMP ASSEMBLY
Rating:
17
Buy INJECTION-PUMP ASSEMBLY 106661-0926 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 586 9400616586
ZEXEL 106661-0926 1066610926
NISSAN-DIESEL 1671396607 1671396607

Service parts 106661-0926 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106066-5550
3. GOVERNOR 105487-1252
4. SUPPLY PUMP 105217-1850
5. AUTOM. ADVANCE MECHANIS 105636-2650
6. COUPLING PLATE 105662-1200
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5470
11. Nozzle and Holder 1660096505
12. Open Pre:MPa(Kqf/cm2) 22.6(230)
13. NOZZLE-HOLDER 105031-4370
14. NOZZLE 105015-5040
15. NOZZLE SET

Include in #1:

106661-0926 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 616 586 9400616586
ZEXEL 106661-0926 1066610926
NISSAN-DIESEL 1671396607 1671396607


Zexel num
Bosch num
Firm num
Name
106661-0926 
9 400 616 586 
1671396607  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
PE6T K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.2 3.15 3.25
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   12.3
Pump speed r/min   650 650 650
Average injection quantity mm3/st.   164.2 162.2 166.2
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Boost pressure kPa   37.3 37.3
Boost pressure mmHg   280 280
Injection quantity adjustment_02
Adjusting point   B
Rack position   6+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   9.1 8.1 10.1
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Boost compensator adjustment
Pump speed r/min   300 300 300
Rack position   10.5
Boost pressure kPa   6.7 4 6.7
Boost pressure mmHg   50 30 50
Boost compensator adjustment_02
Pump speed r/min   300 300 300
Rack position   13
Boost pressure kPa   24 24 24
Boost pressure mmHg   180 180 180
Timer adjustment
Pump speed r/min   925
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   1000
Advance angle deg.   0.8 0.3 1.3
Timer adjustment_03
Pump speed r/min   1100
Advance angle deg.   2 1.5 2.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106661-0926
N:Pump speed R:Rack position (mm) (1)Adjust with speed control lever at full position (minimum-maximum speed specification) (2)Adjust with the load control lever in the full position (variable speed specification). (3)Tolerance for racks not indicated: +-0.05mm. (4)Deliver with idle sub-spring not operating. (5)Boost compensator stroke (6)Rack limit using stop lever (7)Damper spring setting (8)Rack difference between N = N1 and N = N2 (9)Main spring setting
----------
N1=1100r/min N2=650r/min
----------

Speed control lever angle

Test data 106661-0926
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=10deg+-5deg b=(23deg)+-5deg

0000000901

Test data 106661-0926
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=32.5deg+-5deg b=38deg+-3deg

Stop lever angle

Test data 106661-0926
N:Pump normal S:Stop the pump. (1)Drive side (2)Use the hole at R = aa (3)Rack position bb (4)Rack position = cc
----------
aa=50mm bb=13mm cc=1.5+-0.1mm
----------
a=32deg+-5deg b=34deg+-5deg

Timing setting

Test data 106661-0926
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(30deg)




Have questions with 106661-0926?





Group cross 106661-0926 ZEXEL

Nissan-Diesel 

 
1671396571 
INJECTION-PUMP ASSEMBLY
PE6T
 
1671396602 
INJECTION-PUMP ASSEMBLY
PE6T
 
 
INJECTION-PUMP ASSEMBLY
PE6T
 
 
INJECTION-PUMP ASSEMBLY
PE6T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

106661-0926  
9 400 616 586 
1671396607 
INJECTION-PUMP ASSEMBLY
PE6T
Back to top