106661-0922 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066610922

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106661-0922 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106661-0922 1066610922

Service parts 106661-0922 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106066-5200

3. GOVERNOR 105487-1252

4. SUPPLY PUMP 105217-4000

5. AUTOM. ADVANCE MECHANIS 105636-0820

6. COUPLING PLATE 105662-0751

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-5380

11. Nozzle and Holder 16600-96504

12. Open Pre:MPa(Kqf/cm2) 22.6{230}

13. NOZZLE-HOLDER 105031-4370

14. NOZZLE 105015-5000

15. NOZZLE SET

Include in #1:

106661-0922 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106661-0922 1066610922

Zexel num

Bosch num

Firm num

Name

106661-0922
106661-0926

NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
PE6T *

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.2 3.15 3.25

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 12.3

Pump speed r/min 650 650 650

Average injection quantity mm3/st. 164.2 162.2 166.2

Max. variation between cylinders % 0 -4 4

Basic *

Fixing the lever *

Boost pressure kPa 40 40

Boost pressure mmHg 300 300

Injection quantity adjustment_02

Adjusting point B

Rack position 6+-0.5

Pump speed r/min 225 225 225

Average injection quantity mm3/st. 9.1 8.1 10.1

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 300 300 300

Rack position 10

Boost pressure kPa 12 9.3 12

Boost pressure mmHg 90 70 90

Boost compensator adjustment_02

Pump speed r/min 300 300 300

Rack position 13

Boost pressure kPa 26.7 26.7 26.7

Boost pressure mmHg 200 200 200

Timer adjustment

Pump speed r/min 975--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 925

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1000

Advance angle deg. 0.8 0.3 1.3

Timer adjustment_04

Pump speed r/min 1100

Advance angle deg. 2 1.5 2.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Adjust with speed control lever at full position (minimum-maximum speed specification) (2)Adjust with the load control lever in the full position (variable speed specification). (3)Beginning of damper spring operation: DL (4)Boost compensator stroke (5)Rack limit using stop lever (6)Rack difference between N = N1 and N = N2 (7)Main spring setting
----------
DL=4.8-0.2mm N1=1100r/min N2=650r/min
----------