106661-0630 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066610630


106661-0630 INJECTION-PUMP ASSEMBLY
Rating:
9
Buy INJECTION-PUMP ASSEMBLY 106661-0630 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106661-0630 1066610630

Service parts 106661-0630 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP
3. GOVERNOR 105407-0550
4. SUPPLY PUMP 105217-4000
5. AUTOM. ADVANCE MECHANIS 105614-0410
6. COUPLING PLATE 105662-0680
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5950
11. Nozzle and Holder 16600-96510
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105031-4370
14. NOZZLE 105015-5580
15. NOZZLE SET

Include in #1:

106661-0630 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106661-0630 1066610630


Zexel num
Bosch num
Firm num
Name
106661-0630 
106661-0632 
 
  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
PE60 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle   105015-2780
Nozzle holder   105031-4140
Opening pressure MPa   19.6
Opening pressure kgf/cm2   200
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-500
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.65 3.6 3.7
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.8
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   120 117 123
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   4.3+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   17 15.3 18.7
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Timer adjustment
Pump speed r/min   300+-50
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   500
Advance angle deg.   1.5 1 2
Timer adjustment_03
Pump speed r/min   700
Advance angle deg.   3 2.5 3.5
Timer adjustment_04
Pump speed r/min   900
Advance angle deg.   4.5 4 5
Timer adjustment_05
Pump speed r/min   1100
Advance angle deg.   6 5.5 6.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106661-0630
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Solenoid operation confirmation: Set the speed control lever in the full speed position. At pump speed N1 when the solenoid is operated, confirm that the idle rack position is R1 or less. (3)Confirm in same way using manual lever. (4)Set the idle spring. (5)RACK LIMIT: RAL (6)At pump speed N2, set the control lever stopper bolt (minimum speed setting) so that the rack position is R2. (7)Set the idle spring.
----------
K=5 N1=100r/min R1=-1mm RAL=9.6+-0.1mm N2=250r/min R2=4.3mm
----------

Speed control lever angle

Test data 106661-0630
F:Full speed I:Idle S:Stop (1)Pump speed = aa (2)Pump speed = bb
----------
aa=900r/min bb=750r/min
----------
a=3.5deg+-5deg b=(32deg+-5deg) c=30.5deg+-5deg d=7deg+-5deg

Stop lever angle

Test data 106661-0630
N:Pump normal S:Stop the pump.
----------

----------
a=(29deg) b=(47deg)




Have questions with 106661-0630?





Group cross 106661-0630 ZEXEL

Nissan-Diesel 

 
 
INJECTION-PUMP ASSEMBLY
PD6T
 
1679096002 
INJECTION-PUMP ASSEMBLY
PD6T
 
1670096106 

PD6HT
 
1671796501 
INJECTION-PUMP ASSEMBLY
PE60
106661-0630  

106661-0632 
 
 
INJECTION-PUMP ASSEMBLY
PE60
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671796502 
INJECTION-PUMP ASSEMBLY
PE60
 
 
INJECTION-PUMP ASSEMBLY
PD6T
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671796007 
INJECTION-PUMP ASSEMBLY
PD6T
 
 
INJECTION-PUMP ASSEMBLY
PD6T
 
1679096003 
INJECTION-PUMP ASSEMBLY
PD6T
 
1670096108 
INJECTION-PUMP ASSEMBLY
PD6T
 
 
INJECTION-PUMP ASSEMBLY
PD6T
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 616 578 
1670096065 
INJECTION-PUMP ASSEMBLY
PD6T
 
1670096109 
INJECTION-PUMP ASSEMBLY
PD6T
 
 
INJECTION-PUMP ASSEMBLY
PD6T
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1670096066 
INJECTION-PUMP ASSEMBLY
PD6T
 
1671396104 
INJECTION-PUMP ASSEMBLY
PD6T
 
 
INJECTION-PUMP ASSEMBLY
PD6T
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 616 579 
1671396065 
INJECTION-PUMP ASSEMBLY
PD6T
 
1671396514 
INJECTION-PUMP ASSEMBLY
PE6
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671396577 
INJECTION-PUMP ASSEMBLY
PE6
Back to top