Fuel injectors
  1. Home
  2. injection
  3. #1066594000

106659-4000 ZEXEL 9 400 616 576 BOSCH INJECTION-PUMP ASSEMBLY 9400616576 1066594000 1512604210


106659-4000 INJECTION-PUMP ASSEMBLY
Rating:
36
Buy INJECTION-PUMP ASSEMBLY 106659-4000 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 576 9400616576
ZEXEL 106659-4000 1066594000
KUBOTA 1512604210 1512604210

Service parts 106659-4000 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106065-5160
3. GOVERNOR 105447-0170
4. SUPPLY PUMP
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105662-0460
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-1660
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 12.7{130}
13. NOZZLE-HOLDER 105031-2520
14. NOZZLE 105000-1440
15. NOZZLE SET

Include in #1:

106659-4000 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 616 576 9400616576
ZEXEL 106659-4000 1066594000
KUBOTA 1512604210 1512604210


Zexel num
Bosch num
Firm num
Name
106659-4000 
9 400 616 576 
1512604210  KUBOTA
INJECTION-PUMP ASSEMBLY
L6D15 * K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left   L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left   L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3 2.95 3.05
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.5
Pump speed r/min   900 900 900
Each cylinder's injection qty mm3/st.   129.5 128 131
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   9.3
Pump speed r/min   900 900 900
Each cylinder's injection qty mm3/st.   89 86.5 91.5
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 106659-4000
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT: RAL (3)Idle sub spring setting: L1.
----------
K=5 RAL=18+3mm L1=6.7-0.3mm
----------

Speed control lever angle

Test data 106659-4000
F:Full speed I:Idle S:Stop
----------

----------
a=35.5deg+-5deg b=0.5deg+-5deg c=31deg+-3deg

Stop lever angle

Test data 106659-4000
N:Pump normal S:Stop the pump.
----------

----------
a=(0deg) b=(53deg)




Have questions with 106659-4000?





Group cross 106659-4000 ZEXEL

Kubota 

106659-4000  
9 400 616 576 
1512604210 
INJECTION-PUMP ASSEMBLY
L6D15
106659-4011  
 
1512618211 
INJECTION-PUMP ASSEMBLY
L6D15
Back to top