Fuel injectors
  1. Home
  2. injection
  3. #1066515040

106651-5040 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066515040 1679096561


106651-5040 INJECTION-PUMP ASSEMBLY
Rating:
27
Buy INJECTION-PUMP ASSEMBLY 106651-5040 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106651-5040 1066515040
NISSAN-DIESEL 1679096561 1679096561

Service parts 106651-5040 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106065-1270
3. GOVERNOR 105407-4770
4. SUPPLY PUMP 105217-6010
5. AUTOM. ADVANCE MECHANIS 105614-4430
6. COUPLING PLATE 105662-0761
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-5810
11. Nozzle and Holder 16600-96563
12. Open Pre:MPa(Kqf/cm2) 22.6{230}
13. NOZZLE-HOLDER 105031-4370
14. NOZZLE 105015-7570
15. NOZZLE SET

Include in #1:

106651-5040 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106651-5040 1066515040
NISSAN-DIESEL 1679096561 1679096561


Zexel num
Bosch num
Firm num
Name
106651-5040 
106651-5041 
 
1679096561  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
PE6T * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.65 3.6 3.7
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-4 deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   15.5
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   146.5 144.5 148.5
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Boost pressure kPa   42.7 42.7
Boost pressure mmHg   320 320
Injection quantity adjustment_02
Adjusting point   C
Rack position   7.3+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   12.5 11.5 13.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_03
Adjusting point   D
Rack position   14.4
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   110 107 113
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Boost compensator adjustment
Pump speed r/min   500 500 500
Rack position   14.4
Boost pressure kPa   6.7 4.7 8.7
Boost pressure mmHg   50 35 65
Boost compensator adjustment_02
Pump speed r/min   500 500 500
Rack position   15.5
Boost pressure kPa   29.3 22.6 36
Boost pressure mmHg   220 170 270
Timer adjustment
Pump speed r/min   500
Advance angle deg.   0.5
Remarks
Start  
Timer adjustment_02
Pump speed r/min   900
Advance angle deg.   1.25 0.75 1.75
Timer adjustment_03
Pump speed r/min   1050
Advance angle deg.   2.3 1.8 2.8
Timer adjustment_04
Pump speed r/min   -
Advance angle deg.   2.5 2.5 2.5
Remarks
Measure the actual speed, stop  

Test data Ex:

Governor adjustment

Test data 106651-5040
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Boost compensator excessive fuel lever at operation: L1 (at 0 boost pressure) (3)Set idle sub-spring (4)Main spring setting
----------
K=7 L1=16.5+-0.1mm
----------

Speed control lever angle

Test data 106651-5040
F:Full speed I:Idle S:Stop
----------

----------
a=4deg+-5deg b=24deg+-5deg c=32deg+-3deg

Stop lever angle

Test data 106651-5040
N:Pump normal S:Stop the pump.
----------

----------
a=26.5deg+-5deg b=53deg+-5deg

0000001101

Test data 106651-5040
N:Normal B:When boosted (1)Rack position = aa
----------
aa=16.5+-0.1mm
----------
a=(8deg) b=(18deg)

Timing setting

Test data 106651-5040
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(30deg)




Have questions with 106651-5040?





Group cross 106651-5040 ZEXEL

Nissan-Diesel 

106651-5040  

106651-5041 
 
1679096561 
INJECTION-PUMP ASSEMBLY
PE6T
106651-5041  
9 400 616 570 
1679096579 
INJECTION-PUMP ASSEMBLY
PE6T
Back to top