106651-2130 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066512130

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106651-2130 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106651-2130 1066512130

Cross reference number

ZEXEL 106651-2130 1066512130

Zexel num

Bosch num

Firm num

Name

106651-2130
106651-2131

MITSUBISHI

INJECTION-PUMP ASSEMBLY
6D22T *

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 5.1 5.05 5.15

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 11.6

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 138 132 144

Max. variation between cylinders % 0 -4 4

Fixing the lever *

Boost pressure kPa 86.6 86.6

Boost pressure mmHg 650 650

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point B

Rack position 13

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 156 154 158

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Boost pressure kPa 86.6 86.6

Boost pressure mmHg 650 650

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point C

Rack position 6.2+-0.5

Pump speed r/min 250 250 250

Average injection quantity mm3/st. 18.6 15.9 21.3

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_04

Adjusting point D

Rack position 9.9

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 93 87.4 98.6

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_05

Adjusting point E

Rack position 11.4

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 118 110 126

Fixing the lever *

Boost pressure kPa 28 28 28

Boost pressure mmHg 210 210 210

Injection quantity adjustment_06

Adjusting point F

Rack position 12.6

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 150 142 158

Fixing the lever *

Boost pressure kPa 61.3 60 62.6

Boost pressure mmHg 460 450 470

Boost compensator adjustment

Pump speed r/min 600 600 600

Rack position 9.9

Boost pressure kPa 6.7 5.4 9.4

Boost pressure mmHg 50 40 70

Boost compensator adjustment_02

Pump speed r/min 600 600 600

Rack position 11.4

Boost pressure kPa 28 28 28

Boost pressure mmHg 210 210 210

Boost compensator adjustment_03

Pump speed r/min 600 600 600

Rack position 12.6

Boost pressure kPa 61.3 60 62.6

Boost pressure mmHg 460 450 470

Boost compensator adjustment_04

Pump speed r/min 600 600 600

Rack position 13

Boost pressure kPa 72 72 72

Boost pressure mmHg 540 540 540

Timer adjustment

Pump speed r/min 1000--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 950

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1050

Advance angle deg. 2.7 2.2 3.2

Timer adjustment_04

Pump speed r/min 1150

Advance angle deg. 6 5.5 6.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Beginning of damper spring operation: DL (2)Boost compensator cancel stroke: BSL (3)Boost compensator stroke (4)Rack difference between N = N1 and N = N2
----------
DL=5.6-0.2mm BSL=3.4mm N1=600r/min N2=1100r/min
----------

Speed control lever angle

F:Full speed
----------

----------
a=4deg+-5deg

0000000901

F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=21.5deg+-5deg b=39.5deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=5deg+-5deg b=48.5deg+-5deg

0000001501 MICRO SWITCH

Adjustment of the micro-switch Adjust the bolt to obtain the following lever position when the micro-switch is ON. (1)Speed N1 (2)Rack position Ra
----------
N1=310r/min Ra=6.2mm
----------