106651-0370 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066510370 1671396518

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106651-0370 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106651-0370 1066510370

NISSAN-DIESEL 1671396518 1671396518

Service parts 106651-0370 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106065-1100

3. GOVERNOR 105487-0350

4. SUPPLY PUMP 105217-4000

5. AUTOM. ADVANCE MECHANIS 105614-4210

6. COUPLING PLATE 105662-0370

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-5950

11. Nozzle and Holder 16600-96510

12. Open Pre:MPa(Kqf/cm2) 19.6{200}

13. NOZZLE-HOLDER 105031-4370

14. NOZZLE 105015-5580

15. NOZZLE SET

Include in #1:

106651-0370 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106651-0370 1066510370

NISSAN-DIESEL 1671396518 1671396518

Zexel num

Bosch num

Firm num

Name

106651-0370
106651-0371

1671396518 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
PE6 *

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 132424-0620

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.65 3.6 3.7

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 12.6

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 114.8 112.8 116.8

Max. variation between cylinders % 0 -4 4

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 12.6

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 115.6 112.6 118.6

Max. variation between cylinders % 0 -4 4

Fixing the lever *

Injection quantity adjustment_03

Adjusting point C

Rack position 12.6

Pump speed r/min 1150 1150 1150

Average injection quantity mm3/st. 117 114 120

Max. variation between cylinders % 0 -4 4

Fixing the lever *

Injection quantity adjustment_04

Adjusting point D

Rack position 8.1+-0.5

Pump speed r/min 225 225 225

Average injection quantity mm3/st. 8.7 7.4 10

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Timer adjustment

Pump speed r/min 900

Advance angle deg. 0.25 0 0.65

Timer adjustment_02

Pump speed r/min 1100

Advance angle deg. 3.5 3 3.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Adjust with speed control lever at full position (minimum-maximum speed specification) (2)Adjust with the load control lever in the full position (variable speed specification). (3)Damper spring setting: DL (4)Rack limit using stop lever (5)Main spring setting
----------
DL=6.6-0.2mm
----------

Speed control lever angle

F:Full speed I:Idle
----------

----------
a=11deg+4deg-3deg b=22deg+-4deg

0000000901

F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=27.5deg+-5deg b=42deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Set rack position = aa (2)Set the rack position at bb
----------
aa=1+0.5mm bb=12.6mm
----------
a=31deg+-5deg b=34deg+-3deg